DYNO Numbers for Baggers???

A

Army Hopeful

New member
This winter I'm planning to update the power on my '05 Ultra. Right now it is Stage 1 only. What do you think of this Bill of Materials?:

1. 16546-99 3.875" Cylinder Kit 95 ci
2. 16925-02B CNC Cylinder Head Kit
3. 1800-0670 BUB7 True Duals
4. 18400-03 Perfect Fit Pushrods
5. 22439-00A SE HTCC Piston Kit 95 ci
6. 25155-00 SE 257 Cam Kit
7. 32107-01H EFI Race Tuner Kit
8. 32076-04 Compression Release Kit

This should give me about 105 HP.

STEVE! WHAT WOULD YOU DO DIFFERENT?
 
'08 Road King
103 stage 1 kit
Wood TW-6-6 cams
Reinhardt slip-ons
SERT with tuning by Doc at H-D Greenville, SC.

BB6C48B72C944E8BB59EEE2278646D22.jpg
 
I just got the dyno tune done on my new 95" build. I love the way this bike pulls now!! I stressed to the tuner that I was more interested in the torque than the the HP... I got 88.9HP and 102 TQ The torgue hits 100 at 2700 RPM, stays around 100 untill 4000 RPM, and stays above 90 utill after 5000 RPM.
 
97.71 ft-lb, 84.43 hp

The tuner liked the way the AMS heads flowed. He also told me my clutch was slipping, so I may have some more power hidden. He suggested I readjust the clutch at the primary and see if the slippage persists. If it does he suggests Iget new friction plates and come back for a power pull.

AMS 96" BB Cylinder and Piston kit
AMS Ported Cylinder Heads
Cometic 0.040 head gasket
AMS Lifters
Andrews 26G cams
Bassani Tru-Duals
Rush mufflers (2.5" baffles
PCIII USB

7CDB17D283BA482085BF0CCB0EDA674E.jpg
 
Nick told me that he enlarged the exhaust ports and milled .030 off the head and installed a .040 head gasket. The build really felt good, nice and strong, but when he tuned it ( 3 hours) it really came alive.
 
Terry here had my 07 roadking done factory 96 cu in true dual rineharts (efi racetuner)
stage 1 hi/per air cleaner max power-73.23 max torque-87.91 dyno date 1/5/08
BE SAFE>>>PEACE
 
2007 street glide stock 96"
se.204 cams
se.adj pushrods
pcIII
se.stage1intake
vancehines true duals
rush mufflers/w 2" inserts
se.plugs/wires
(79hp/96tq) I thought the hp number would be higher but from what iv seen guess i shouldnt bitch..????????? anny other 07's out there??
 
Good for you! It sounds like you really have a great girl there! That is pretty cool, and I bet it will run great!

I'm still torn between going with theFuelMoto customset up, or go with the D&D Fatcat, SERT, SEAC setup. There's about about a $600 difference that I don't know if I can swing right now.

I would love to see some numbers from anyone running a D&D Fatcat, SERT, SEAC setupin the lower regions of the US. I'm in Phx, AZ. I already have a very good idea of the numbers I'll get out of the FM pkg. I will probably not be able to afford any further mods for a while, so this will need to tide me over for a bit.
 
Back
Top