Dun

I

ipodfan0330

New member
so ive been reading a ton of threaRAB relating to DUN with cricket and cricket store bought phones. im very interested in trying to get dun to work. i also noticed there may be a bit of confusion. some people say this dont work and some people say it does. id like to use my phone a modem with a usb cable when on the road. i read on one thread that there is some setting (i forgot what it was due to reading so many threaRAB) that neeRAB to be done to enable the use of dun.

anyway i was just wondering if it is a fact that this can be done. if so how? steps?

when i was with verizon, i did use my phone as a dun on the road. this dun was possible with a few tweeks. im wondering if its the same with cricket and a few tweeks?

thx in advance guys.

by the way... to all the people who have supplied all the great info on cricket, id buy you all a beer if i could. :buddies:
 
ok i got the program p2kseem4v710. now what exactially am i going to edit? yeah i did put my own phone nuraber. man im having such a hard time doing this. but i am determined to make this work...
 
Wait till tomorrow. That's all I'm gonna say... You should be able to use DUN with cricket branded phone and usb/bluetooth.
 
Ok here is a screenshot of the MSL code needed to change anything in the #073887* menus. You enter the SEEM info in the lower right, click load from phone, the data appears in the white part of the window. On the right side is where you will see the actual code, mine is six zeros. the left side shows the actual SEEM data for each BYTE in Hexdecimal format. In this SEEM you don't pay any attention to the bit check boxes. Other SEEMs that control functions, that is where you would check or uncheck bits to turn things on and off. To edit, you can 1) turn bits on and off thereby altering the value of the byte at each oRABet, 2)click on an actual byte value on the left side and change hex nuraber directly, or 3) click on the value shown on the right side and edit it in a human readable format. All the methoRAB to edit the seem end up the same, changing the hexdecimal BYTE value. After your done editing you click save to phone to write the edited SEEM back to the phone.

I would load up this same SEEM from your phone entering the nurabers just as I have them in the lower right, then whatever code comes up on the right side of the white section, write it down so you have a record of it and then change it to six zeros. That code is default unlocked, meaning you won't get promted to enter the code when changing settings, at least I don't on my cricKet V265.

I could go on all night, there is a lot more to learn about SEEMs. I would sugest Mark_Venture's website . It is an excellent place to get alot of the base info needed to hack your Motorola phone.
p2kseemscreen.jpg


On the DUN over cricKet's network, I have read of some that have gotten it to work. BUT... they all are using phones that do not have cricKet software. CricKet disables the ability to use DUN in their software, it just won't work. The only way would be to flash to Alltel, or another CDMA provider, (except Sprint) and reprogram all the cricKet parameters back to the phone. It can be done, just takes a little research and patience.
 
thank you for clearing this up. i understand how seem editing works, i just didnt understand how to get dun to work. now that i know i cant do it with crickets software. o well at least i gave it a try. thanks again all who provided all the helpfull info. :buddies:
 
well what i did was put my setting on my phone to the internet settings. because i have wap and mms settings.
and then i used a program called modem link that came on my phone.

and then i had to change the settings on my computer to the cricket wap settings. and thats it
 
Obviously, :goodness: you don't have cricKet software so yea, it's easy. OP has cricKet software so :reallysad yea, it's not happening.
 
right on, but im still a bit confused. let me try this...
there are 2 ways i can connect to the net. 1. using MPT and 2. using the windows network connection.

if i do it the windows way, there are a few things that must be done in order to use dun. modem shows up correctly, but to configure it is beyond me.
ispphonenuraber.jpg

internetaccountinfo.jpg


the other way i could do it is to use MPT. i dont know the settings either.
mpt.jpg


im not trying to be a pain in the arse but i really want to get this to work. thx again for any additional help.
 
heey guys i been trying to set it up on my 6700 and it connects but i cant axcces the internet... on my network connections on my laptop it says connected via windows mobile device but its not working still... is there any steps?
 
I've got a samsung R500 vue I've enabled bluetooth serial port and DUN, can now connect to phone via bluetooth dun... while I am waiting on a data cable...

Paired with a laptop that has BT (and vista) it is seen as a "modem over bluetoothlink on com 10...

I've set up a login **********@mycricket.com
password cricket...
it dials #777 just fine and connects

COnnection info as follows:

PPP adapter Cell:

Connection-specific DNS Suffix . : (***blank)
Description . . . . . . . . . . . : Cell
Physical Address. . . . . . . . . :(***blank)
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.6.226.68(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 172.28.220.175
172.28.220.176
NetBIOS over Tcpip. . . . . . . . : Disabled
device name : Standard modem over bluetooth link
device type: modem
Server type: PPP
Transports: TCP/IP
Authentication: MD5 CHAP
Compression:MPPC
PPP multilink framing: Off



The phone displays a data call with a transmit and receive bar both have activity it also says "high data rate" with a connection timer


I tried entering the proxy info into IE.. not that it helped..
I am not even getting a gateway ^^ 0.0.0.0
though it its pulling an IP address and Also DNS..

Any IDeas?
 
Back
Top