Dead xx65,xx72,xx75 after unlock solution here!!!

  • Thread starter Thread starter edcentec
  • Start date Start date
E

edcentec

Guest
--------------------------------------------------------------------------------

Step by step, mobile dead after unlock:

1 - Puts the telephone in " service mode " with the "papua utilits"
2 - Closes " papua " and open the " eeprom tools ".
3 - Click in "load" and open the corretly file.(model and version)
4 - Proceed the remaining steps (7) as display the illustration(Attached).
5 - Closes eeprom tools.
6 - Open "papua" go to " flash ", mark "pause" and " recalculate keys in flash "
(two other options will mark, leave how it is)
7 - With test point clicks in " DO JOB " it removes test point in 2 seconds,
wait the end of the process.
8 - Power on, Mobile lives again!

If need, calculate the " keys " make this before to start the process,
and " enter in skey in phone"(how to unlock)

Regards,
 
Hmmm ...

The steps 1,2,3,4 and 5 can be removed (attachment also !!)


Everyone who knows how to unlock x65, he knows this,

It is same as IMEI repairing on E-Gold based siemens phones ("Repair" button in SST .. etc)


Regards,
B
 
Please is there any eeprom for c6v version 08 or 25 (eeprom damaged).
Thank you in advance
BR
 
BB, sometime eeprom is damaged fully, olnly full eeprom write works, this is a free solution for free unlockers, seek all steeps.
excuse my english.
 
bb- gsm .... is right if mobile dead withen jafa method

edcentec .... is right at all

wbr
 
@edcentec
Thanks. Tested with the c65 eeprom full+lite v50.

good method for repair c65 dead.
 
i need help

dont save de eeprom , display this erroR
---------------------------
Siemens EEPROM tool
---------------------------
Error ?15 (WBlockInfoQuery) while writing block ? 5008...

You can retry writing, skip this block or abort whole writing process.
---------------------------
Anular Reintentar Omitir
---------------------------

pls help is from a *******r
thanks
 
Or, erase eefull + eelite with papuas an retry write eeprom with "eeprom-toosl" , if error: cliks "ignore" to all. its works!
regards.
 
this is the most easy and safe wat to unlock x65

thk man

we hope more details in fourm to help all user
 
@edcentec
hello, i have a dead cf76 v17 i tried to repair for all methods but i cant, i see your guide but in the eeprom zip file isnt the .eep file for this phone and model i dont know how to get it, can u help me??

tnx
 
How about CX70 dead after format FFS_C With Papuas or anybody have eep for this phone please share.............
 
I try using winswup but after 33% program stop....and using Official update from siemens program say update progress stopped by phone.....any ide...????
 
well, I believe if u battery are fully, hen the file this wrong. . . . . . copy full flash of the any mobile good, and apply in other.......then you will have success ....... I have success only trying all options......they are many ...good luck!!!!!!!!!( I dont have this files for send u)......then create this......I make this.....
 
Back
Top