cx65 sw-v08 with papua?

  • Thread starter Thread starter .:bono:.
  • Start date Start date
Make sure that the cayman of the testpoint the most hit thing is possible to the metallic GND, as it shows you the image:
http://download.allsiemens.com/phantom/X65_Tespoint.rar
 
for all my operation, i haven't did the test point anymore. my phone sw is v08, should i need the test point?
 
@ Aishur

SKey is already entered !
And which keys must soft enter in phone ? its original keys ? (We just read keys, nothing else!!)

@ bono_x100

No need TP !!!
Go at the 4th page of papuautils, and press "5121 Master ?" ...


Regards,
B
 
so what's Auto Open all button used for, i understand from u and bb-gsm that autoopenall means read key and send it to phone, but when i did it my phone was locked after??
 
Check port number, cable, phone, mode!
Reading block 5121...
OTP ESN: C6CA6F49
OTP IMEI: 353538008858385
Reading block 5121...
Calculate "Master codes".
Phone can be turned off!

but the progress bar is still runing...........
 
Hello All,

I have same problem as Bono_X100 but my phone sofware version is 50 so the Open ALL is not working. I have the Hash and the ESN with Px65V5 and X65flasher calculate the Boot password. But the Skey is missing so I don't know what I shall do. Pls help!

Thnx,
Jimkz
 
Hi mates,

OpenAll function don't work for version above 36.
You have to invert the byte orders for esn.
Example if you read with java midlet esn= 12 34 56 78 then you must enter esn in papua As 78 56 34 12 and calculate all needed keys.

after that use any method to unlock it.

Best regards,
Aishur
 
Tanks Aishur,your advice was good and I was success in the getting Skey too.
But could you describe the best and most simple method for me.
Kind Regards,
Jimkz
 
Hi,
I'm sorry but I'm verry beginner.
I pushed the 'Skey enter' button and the phone security status become Factory mode. and then I pushed the '5121 masters?' button and the papua is still in progress now.( for 3 minutes. Is it normal?)

(I tried the freia log but only happens that papua created a log file but I don't know how I can use it.)
BR,
jimkz
 
OK, Papua finished the work and got the unlock codes. Big thanks to Aishur!
))))))))))))))))))))))))
 
==Siemens Tutorial==
====================
-USE DATA CABLE-
-insert a SIM card from phone network, or use sim EMU from prog.
-PW ON phone insert cable ..and never disconect the cable!
-Start SiMoCoSetup225.exe
-Copy PX65V4(px65v4.jar to phone in: "Data\Java\jam\Applications"
-Start aplication (into phone) -
 
Wrong !

It just reads Keys !!! And enters only SKey in phone !!!

Then you must do what you wanna do !

I did not think it would be so hard to understand !

Regads,
B
 
USE UNLOCK CABLE
-GO 'ServiceMode'.
-READ ALL KEY
click'Enter Skey to phone'.now all keys are saved..should appear 'FactoryMode'.
-Cick'Freia.log'. dont save the log,click CANCEL.
-Now the prog ask if you want write blocks directly to phone.click Yes.
-Program write the blocks DONE

OR
POWER ON PHONE
READ ALL KEY
click'Enter Skey to phone'.now all keys are saved..should appear 'FactoryMode'.
-Cick'Freia.log'. dont save the log,click CANCEL.
-Now the prog ask if you want write blocks directly to phone.click Yes.
-Program write the blocks DONE




.
 
Back
Top