cx65 sw-v08 with papua?

  • Thread starter Thread starter .:bono:.
  • Start date Start date
B

.:bono:.

Guest
hi all, i know that search bottun can help me, but i'm really newbe in s-gold phones.
does i nead test point with this version 08.
how can i unlock it, many button in the soft and i'm scary to **** it up.
step by step plz
thanks
 
thank u verry much
Check port number, cable, phone, mode!
Reading block 5121...
OTP ESN: C6CA6F49
OTP IMEI: 353538008858385
Reading block 5121...
Calculate "Master codes".
Phone can be turned off!
*#0000*08702621# - Network Lock.
*#0001*00000000# - Service provider lock?
*#0002*00000000# - Personalization of services supplier?
*#0003*61503784# - Phone Code (Lock).
*#0004*00000000# - Network subset lock?
*#0005*00000000# - Only this SIM.
Calculation finished.

no test point neaded *#0000*08702621# unlock my phone
thanks, u have gave me a good experience
 
Hi mates,

I wrote the regular method and it should work like the yours. Maybe can you tell what is wrong in my statement.
I said the job is done at 90% because our friend bono_x100 has valid keys (Skey and Bootkey).


Best regards,
Aishur
 
thanks i did it without test point and i got this
Boot in Service mode...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting power on phone...
Getting Information:
Model: SIEMENS CX65 08 lg1
Phone is in "Service Mode" mode
IMEI: 353538008858385
SecurityStatus: CustomerMode
HWID: 320
Accumulator Voltage: 3709 mV.
Reading data from phone...
ESN: C6CA6F49
HASH: B9EC92EC9C5FB8158885DF57F5C3B0C1
Calculation of keys...
Keys calculated successfully:
BootKEY: 500CFDE404811B26317DFAD81901BAE2
SKEY: 26999137
Sending Skey...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
Phone is turned Off...

phone still locked!!
 
Hi mates,

for lower version, don't forget legija's x65 soft, for whose have trouble with papua.

Best regards,
Aishur
 
1) If you read the log carefully you can see: (and this is general)
SKEY: 26999137
Sending Skey...
SKEY entered!
2) That, what u say is to write masterkeys to phone, but in this case, he just read the keys, nothing else he did not do ... And if he`d do that, would have locked phone again I think it`s easy to understand ...



Regards,
B
 
hi mates;

where you see that "he just red the keys". I said to use freia.log button to unlock it. Follow the history you will understand more.
Don't forget that papua will test the skey before writing the map.
Best regards,
Aishur

Best regards,
Aishur
 
@ Aishur

We are arguing for a nonsence ..
When you have such phone, you`ll do what you wrote and see if it will unlock


Regards,
B
 
go to tab "Flash",select "REPLACE MASTER CODES",
press DO JOB, and after finished,

enter manually unlock codes,
which are all 12345678.
(read what is written in INFO window)

ie:
- netork lock, enter *0003*12345678#

b.r.
Alexandar.
 
Auto Ignition...
Transfer boot...
Boot not loaded!
Invalid BootKEY or not joined TP!
Boot released.

my battery is low, i will charge it and see or maybe i nead the tp
 
try with this soft
regards
http://forum.gsmhosting.com/vbb/showthread.php?t=173907&highlight=c65+unlock+by+dima
 
@bono_x100
If the imei the u cx65 is: 353538008858385 as u says
test with the phone without sim *#0000*07922318#

Tested by me in some cx65. This code I obtained it from:
Imail generator v1.1 www.GSMDUNYASI.com for Siemens cx65, cv65.
doesn't work with all the models, it proves that code a single time.

But it continues with Papua that that if it is tested 10000% for my. Make sure of having the testpoint well.

Good Luck!
 
Hi mates,
You have done 90% of the job
1 After sending skey you must unlock it ( right side button of send skey one)
2 Presse Freia.log button then answer to the two following popups by cancel then yes respectively.

Best regards,
Aishur
 
Hi mates,

No need to argue for the evidence. I have unlocked many phones x65 x75 like I said.

In Papaua, the main goal is to get the keys Skey (Service Key) and the BootKey (Boot Key needed for flashing).

In order to unlock, we can use
1 press Freia.log (like I do)
2 Check the 9th box in 5th panel and do jobs to replace the masters.( 2 other boxes are self checked too)
3 press 5121 (like you do) end enter the codes manually.

By the way no blabla or more information is needed here is below the freia log

HWID: 320
SKEY: 26999137
BKEY: 500CFDE404811B26317DFAD81901BAE2
[Model: Siemens A50][PhoneID: 496FCAC6][Desired IMEI: 353538008858385]

Members are witnessing that I am right.

No need again to stay in this pointless discussion, If you like to stay in your stuborness then continue to do it. You are in the straight path.

Best regards,
Aishur
 
Back
Top