CX65 Portuguese flash

  • Thread starter Thread starter tomlamix
  • Start date Start date
T

tomlamix

Guest
hy guys!

Ive got this cx65 that turns off by it self, other times it remains on for a few minutes and then turns off, etc etc. I think that with a fulllflash this goes to where it belongs. The problem is that i cannot find a place where to get a portuguese flash for this. Can anybody help me on this one?

Thanks!
 
Hi,
you request the CX65 fullflash with the portuguese language. No chance
So:
download from the http://eh.student.utwente.nl/~landy/index.php?dir=Repair_FuBu/
user: mobile
pass: elibom

CX65_360100_A106_fubu.rar (bin file) ...and you have the portugese language included.

Br,
dagos
 
Thanks a lot for your help! But now ive got an other problem...its a lame problem but here it goes I thought that the joker software had CX65 support but it doesnt. What software do you advise for this job? I want to make a backup first just to make sure.

Thanks!
 
..of course, bro. Joker doesn't support the S-Gold phones. Use the X65 flasher (search on my posts to download it).
Br,
dagos
 
Too late...ive used SST 6.50 but nothing...ive download now the software ou told me but it gives me an error "No answer from loader (bootkey not accepted)...."

What can i do?

Thanks!
 
ok, but to use it i need to know where is the TP for this one and learn how to use this software. The X65 Flasher asks me to calculate the bootkey, that i dont have, using the Bsreader or TP. Well, bsreader i cant use, the phone is dead, and the TP i need to know where it is.

Thanks!
 
Hi,
to find the Test point, download from http://rapidshare.com/files/18403650/Siemens-Testpoint_Station_3.rar

and unpack it.
Br,
dagos
 
im going to give it a try dagos.

thansk for your help, i will give you a feedback...
 
Well, here it comes the questions ...i see i have to use a 15-20ohm Resistence between the TP and gorund but its necessary to be there for the entire flashing? Its boring, i dont know if i can handle it. Or is only for the ignition?
 
Ok...searching the forum i saw that i have to solder it there. Ive never solder a thing so small...maybe i can manage a wire that is thin like the hair. Its your advise for this job? Or should i use an other trick?

Thanks!
 
Not other trics. Connect only the testpoint to the ground and make the short between the pins coresponding to the red key (for start), after disconect the TP (from the GND) and the flash process will started.
Br,
dagos
 
wow..lets see if i get it. I place the resistor between the ground and the TP, after that i shunt the power On and after that when can i take of the wire from the TP? Just after? Or the program tells me when to take it out? Its a little confuse...sorry
 
All this info is on the x65 flasher you told me...im sooo stupid Sorry for the trouble. I will try it and i will let you know the results! Thanks again!
 
Ok, ive tried it out. The program reads the Hash key but not the ESN key so i cant generate the skey for this one. An other strange thing is that the phone model that shows is CXv5@. Strange...

here it is the info i can get:

hash:
FA05-DDE1-E7A0-C423-761B-EDFF-EFEB-ECE7

Esn:
- (this one is empty)

What you sugest now?

Thanks in advance!
 
Back
Top