Counting PIN of SL45.

  • Thread starter Thread starter ^NaT^
  • Start date Start date
N

^NaT^

Guest
I'm confused.
From this PICs, which is PIN 1 LeftSide or RightSide ?
Thank you very much.
 
Hello!

That's right PIN 1 is in the right in that picture...

I'd like to ask You how to connect the SL45 PINs in case I want to use a
charger and in case I want to make an USB connection with computer
(one for charging and one for data transfer).
I would be grateful if U reply to me with solution.

The charger seems to be connected to PIN 1 (minus pole) and to PIN 3 (plus pole).

I'm wondering in a device (a projector) that can project the current time
to the wall (like in sx1)!
What's Your opinion?

there's a good homepage "http://sl45.sjostedt.no/?page=mods", but in
the "Minijack" window the "External links:" are not working!

If I can tell U something about my experiences let me know.
I have already built a laser, a led (one UV for money detection and one
superbright led), a minijack and a microphone input.

MoDrone, Hungary
 
@ modrone
Hello

I' m attaching 2 images of interface and pin out on sl45 in case you dont have them. Hope this helps.

I saw you made a microphone input ?

Is it an external microphone attached to the adaptor?
Does it have an amplifier for better recordings ? (for example at a conference speaking or during lesson's time or when spying someone?) because the default record level is not sensitive enough.

Greets.
 
Thank You very much for these pictures.
I'm going to buy an external microphone today and I will write down what have I found!
 
Hi all.
From this PICs, which is PIN 1 LeftSide or RightSide ?
because @kalac = "Left is no. 1" but @modrone = "That's right PIN 1".
I'm confused. From this PICs.....
please help me.
thank a lot.
 
>^NaT^
Oh, excuse me, the correction is
That's right PIN 1 is in the left (not the right) in that picture...

>sadengr

Do U know how to connect the usb cable pins to the sl45 pins to get data transfer or charging?

MoDrone
 
@MoDrone: I think, to connect the sl45 to usb is not as easy as you think, just assigning sl45 pins to usb pins as I know you need to build some electronic hardware (some chips, resistors, capacitors etc.). you may find the circuit diagrams on the net.
 
>naransula
>electronic hardware (some chips, resistors, capacitors etc.). you may find the circuit diagrams on the net.

I'm bad in searching the net!
Plz, can U send me some links about this topic???
I would be grateful.
MoDrone
 
i built an adaptator that work fine with my HIFI (good sound quality), iust connect the three first pin(counting from right)
 
@lazioroma
please explain for your adaptator (good sound quality) and your pic.
thank a lot.
 
@modrone:"Do U know how to connect the usb cable pins to the sl45 pins to get data transfer or charging?"

I don't know if its worth to build an interface because there are cheap usb connectors for buying, for instance :
http://www.suntekstore.com/usb-data-cable-siemens-c25-s25-c35-s35-6688-c45-sl45.html
 
@kalac and @modrone
thank you for answer of PINOUT.

@lazioroma
thank you for your picture.
 
>lazioroma

But I don't understand what have U done with the last 3 pins, because I knew that if U build an external audio port U can use them:
- Pin 2 - Left ear
- Pin 11 - Right ear
- Pin 12 - Audio Ground

And U use 10,11,12? I wonder how it can work.
What is the connection for pin 10? It is the Left ear?
 
Back
Top