Connecting x65 series with PC

  • Thread starter Thread starter Wyshniukas
  • Start date Start date
W

Wyshniukas

Guest
How to connect x65 series to PC?! Instaled MPM & it still doesn't want to find the phone! What to do?!
 
This is my cable photos! Then I connect & write the drivers it shows profilic But the CX65 still can't connect!
 
This cable is fake sorry . .. . . do you need automatic cable without setting ....
 
Solved my problem! Downloaded same software & it connects perfects! Thanks for posts
 
I have almost the same cable... what did you say you downloaded? My CX70 cant connect(my M55 also) AND I cant intstal MPM after I removed it, but still - what did you say you downloaded?
 
I've been having the same problem. No phone manager software I've tried will connect via cable or infrared. Windows recognizes the phone straightaway (Xp Pro) and files can be transferred between the PC & phone (CX65 sw25)

Seems that MPM etc can't access the IR port.

Cable is a Mobile-Action USB-serial bridge & works with C55 etc. including full flash, unlock etc. & one of the flashers I tried connected to the CX65 but nothing else works.

Any help & advice much appreciated


BG
 
I think it was AT Enable & VNavigator Siemens FlexExplorer (VSFE)
I know that if you connect 10kOm resistor to 2 with 5 cable pinouts, solves all connection problem with flashers, winswup and so on.



Try to connect those 10kOm resistors to 2 with 5 cable pinouts...I think it would solve your problem.
With transfers files I suggest SiMoCo/VNavigator Siemens FlexEplorer

All this software you will find @ www.wyshniukas.com
 
Hi m8

Opened the plug on my data cable & pins 1-6 are all connected via the cable. Plus the resistor values are quoted differently from one thread to the next on here. Can you tell me if the 10K's will work on the USB cable & which pins to connect them to? Thanks very much for your reply m8.


Plus any advice on why bloody Windows Xp won't allow other programs to access the IR (& how to get round it) will be much appreciated


BG
 
I tested with the USB cable with PL2303 microchip, used 10kOm resistor & it worked very well. There is a problem that I dont have that cable & cant make a photo how to it was connected...sold it & changed to few original cables
Here is the photo how one website suggested to connect resistors (2x15kOhm) but it's no need. You can open the box in the midle of cable & plug, find what color is 2 pinout & 5 pinout, then connect that resistor 2 pinout to 5 in the box & test it. In *#06# more, find Acc: It should show plugged in: DCA510
About IR...try to download newer MPM version like 4.03 or 4.06 or just try this: open MPM, go to Settings, Connections...I think it will be selected to Automatic, so make Manual, chose COM port which uses IR, select again Automatic & Apply...now wait till MPM finds phone, ~10s as I remember.
Also IR problem can be related to mobile firmware, so I suggest also to upgrade to FW50
 
have u tried using serial c55 china cable and obex comander software? i read on this forum and said tha it`s working
 
@cobraro

I only have the one cable which fits the x55/65/7# series so looks like I'm going to have to buy one


I did try MOBILedit! but although this detected the phone via IrDA the bloody thing wouldn't browse the phone then crashed & wouldn't run again :bash: a bit like when you have multiple instances of WORD in Task Manager & the window won't appear, although I couldn't find this program in the running task list. Haven't tried it since


BG
 
old story ...

some cables work, some not ...

but here's how to make ALL work ..

install cable drivers,
power on the phone, with sim inside,
use attached AT_Enabler,
after it report that have found the phone,
you can use either MPM or SiMoCo software,
which will 100% recognize the attached phone.

i use this method for ages,
and it worked on every phone ...


b.r.
Alexandar.
 
Yep, too old one

I`m impressed nobody noticed the file x65_VNavigator.rar at evil-hackers.com/BB-gsm ?!!
It was uploaded and named VNavigator from 2005, after I renamed it x65 but still noone "found" it ))

Install it, no need any enabler or anything, just Rx, Tx, GND with any cable

And you`ll see folders of phone, copy/paste/delete anything as in PC !


Regards,
B
 
@BB-gsm
u right , no need to ATenabler to fix these type of problem
just use correct pinout cable

i don't know what @brka try to show
 
@bb-gsm
u mean we can transfer the Px65 to phone using simple uni box unlock cable with that Soft at ur Mirror
 
@rise

what am I trying to say ???

you know sh!t about different cables and problems with them,
and only thing that ALWAYS works with gazzilion different types
of chinese cables ... is ONLY atEnabler ...

if u dunno what is it ... dont be an smartas$


b.r.
ALexandar.
 
new solution

use
1.Totalcmd
2.install a plugin (wfx_vsofs) on atachament - aply this plugin in options on totalcmd

3. go to network places lik picture1 and voila
4. setings must be like picture2

good luck
 
@cobraro22

i try your solution on c65 and it works except when i upload px65v5 or any files (jpg,etc) it get stuck. Even when i try to drop files i get errors like 'PLEASE REMOVE THE WRITE PROTECTION'. However, when i copy files from phone to computer i got no problem at all.

br,

beega
 
Back
Top