Hey guys, if you guys get an unlocking code here are the instructions to unlock your Cingular At&t. Hope this helps!
BlackJack
Step Action
1. Insert NON accepted sim into device
2. Power on the device
- Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3. Enter the unlock code in the blank field
4. Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5. Press Ok
- The device is now unlocked and should continue booting
OR
1. Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
2. NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
Enter *#1546792*#
Select Option 3 Network & Call Settings
Select option 5 Network Mode
Select GSM
Without sim alternative i607 / Blackjack
Power on without sim, you will then get a message saying "SIM Failure" at the top of the screen.
Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*
Then it will display "Enter Network Control Key" this is where you enter the 8 digit unlock code. Then click ok
Your phone is now unlocked
Unlock Instruction for FIDO Samsung i616 Jack
1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
3. Device is now unlocked
How to Enter Unlock Codes on Samsung Z105 and Z107:
Switch ON your phone with a not accepted SIM card
Compose : #7465625*638*YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung Z510 and Z320i:
Switch ON your phone without SIM Card
Compose : **YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung 3G, Zxxx & Dxxx, A707 Series:
Switch ON your phone without SIM Card.
Compose : #7465625*638*YOURCODE# (or *#7465625*638*CODE#) (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung (all other models):
Switch ON your phone with a not accepted SIM card
Phone will ask for the "Password"
You can now enter the unlock code
OR (if phone shows "Insert Correct SIM Card")
Switch ON your phone with a not accepted SIM card
Compose : #0111*YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Treo 180, 270:
Switch ON your phone without SIM Card.
Compose : *#*#CODE# (substitute the word "code" with the unlock code we gave you).
or
Switch ON your phone with a not allowed SIM card.
Enter the unlock code.
Important Note: On some models the Num Lock is not automatically enabled so make sure it is ON before entering the unlock code.
How to Enter Unlock Codes on Treo 600 / 650
1. Power on phone with a non-cingular sim inserted
2. When phone is powered up dial any number, it will ask you if you want to turn phone on, click yes
3. It will say "your phone cannot be used with this SIM card" click ok
4. It will say "Network Search" click cancel
5. using the dial pad do the following: enter *#*#code# then press dial on the screen.
6. It will say the sim lock has been removed from your phone
How to Enter Unlock Codes on Treo 750:
Please insert a not allowed SIM card.
Place the battery and the cover, windows will boot automatically.
Turn on the phone by pressing the front upper-right red button on the keypad.
The phone will ask for the unlock code.
Pull out the stylus at the back of the phone, tap the keyboard icon at the center-bottom of the screen.
Enter the unlock code by tapping your stylus on the screen keyboard. Then tap OK.
Your Palm Treo phone should be unlocked by now
OR
Switch ON your phone with allowed SIM card.
Go to menu and select "Phone Tool" or "Phone Application"
Type on virtual keyboard *#*#CODE# (substitute the word "code" with the unlock code we gave you).
Select with PEN "Number" and phone will show that it's unlocked.
OR
Power on with NON-Cingular sim
using physical keyboard hold down key with large white dot ( lower left hand corner of keyboard ) while typing numbers on the keyboard
How to Enter Unlock Codes on Treo 680 / Centro:
1. Power on with non-cingular sim
It will then say "Your phone cannot be used with this SIM card"
2. Click ok
3. Click dialpad tab, bottom of the screen far left
4. Using stylus type *#*#code#
5. Press the green button
6. It will then say The SIM Lock has been removed from the phone"
Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
HP iPaq Unlock Code Entry Instructions
How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)
Step Action
1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue booting
OR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
*If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload here : http://rebootitsmagic.com/ipaq/SP29760_6315.zip
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM
How to Enter Unlock Codes on Sony Ericsson Cell Phones (all models):
If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
For the unlocking of a locked Sony Ericsson no sim card is required.
Turn on the handset. Display will indicate
BlackJack
Step Action
1. Insert NON accepted sim into device
2. Power on the device
- Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3. Enter the unlock code in the blank field
4. Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5. Press Ok
- The device is now unlocked and should continue booting
OR
1. Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
2. NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
Enter *#1546792*#
Select Option 3 Network & Call Settings
Select option 5 Network Mode
Select GSM
Without sim alternative i607 / Blackjack
Power on without sim, you will then get a message saying "SIM Failure" at the top of the screen.
Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*
Then it will display "Enter Network Control Key" this is where you enter the 8 digit unlock code. Then click ok
Your phone is now unlocked
Unlock Instruction for FIDO Samsung i616 Jack
1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
3. Device is now unlocked
How to Enter Unlock Codes on Samsung Z105 and Z107:
Switch ON your phone with a not accepted SIM card
Compose : #7465625*638*YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung Z510 and Z320i:
Switch ON your phone without SIM Card
Compose : **YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung 3G, Zxxx & Dxxx, A707 Series:
Switch ON your phone without SIM Card.
Compose : #7465625*638*YOURCODE# (or *#7465625*638*CODE#) (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Samsung (all other models):
Switch ON your phone with a not accepted SIM card
Phone will ask for the "Password"
You can now enter the unlock code
OR (if phone shows "Insert Correct SIM Card")
Switch ON your phone with a not accepted SIM card
Compose : #0111*YOURCODE# (by "yourcode" I mean the unlock code we gave you)
How to Enter Unlock Codes on Treo 180, 270:
Switch ON your phone without SIM Card.
Compose : *#*#CODE# (substitute the word "code" with the unlock code we gave you).
or
Switch ON your phone with a not allowed SIM card.
Enter the unlock code.
Important Note: On some models the Num Lock is not automatically enabled so make sure it is ON before entering the unlock code.
How to Enter Unlock Codes on Treo 600 / 650
1. Power on phone with a non-cingular sim inserted
2. When phone is powered up dial any number, it will ask you if you want to turn phone on, click yes
3. It will say "your phone cannot be used with this SIM card" click ok
4. It will say "Network Search" click cancel
5. using the dial pad do the following: enter *#*#code# then press dial on the screen.
6. It will say the sim lock has been removed from your phone
How to Enter Unlock Codes on Treo 750:
Please insert a not allowed SIM card.
Place the battery and the cover, windows will boot automatically.
Turn on the phone by pressing the front upper-right red button on the keypad.
The phone will ask for the unlock code.
Pull out the stylus at the back of the phone, tap the keyboard icon at the center-bottom of the screen.
Enter the unlock code by tapping your stylus on the screen keyboard. Then tap OK.
Your Palm Treo phone should be unlocked by now
OR
Switch ON your phone with allowed SIM card.
Go to menu and select "Phone Tool" or "Phone Application"
Type on virtual keyboard *#*#CODE# (substitute the word "code" with the unlock code we gave you).
Select with PEN "Number" and phone will show that it's unlocked.
OR
Power on with NON-Cingular sim
using physical keyboard hold down key with large white dot ( lower left hand corner of keyboard ) while typing numbers on the keyboard
How to Enter Unlock Codes on Treo 680 / Centro:
1. Power on with non-cingular sim
It will then say "Your phone cannot be used with this SIM card"
2. Click ok
3. Click dialpad tab, bottom of the screen far left
4. Using stylus type *#*#code#
5. Press the green button
6. It will then say The SIM Lock has been removed from the phone"
Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
HP iPaq Unlock Code Entry Instructions
How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)
Step Action
1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue booting
OR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
*If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload here : http://rebootitsmagic.com/ipaq/SP29760_6315.zip
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM
How to Enter Unlock Codes on Sony Ericsson Cell Phones (all models):
If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
For the unlocking of a locked Sony Ericsson no sim card is required.
Turn on the handset. Display will indicate