Chrysler turn signal working odd?

M

Maranatha

New member
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
its a 2000 Chrysler cirrus with the 2.5 and the turn signal will work (blink) when you push it down but will stop blinking eventual.

it click ups and down like it should and the bulbs and fuses are good. the only things i think it could be the the relay, to much dust in the switch and the connections are dirty, or the switch has had it?

anyone have had this problem or any advice before i take the time and take abort the dash to get the switch out?

had a similar problem on my 02 jeep grand Cherokee but it was a know problem with the relay cant find anything online similar to my problem in the cirrus
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Use a test light to check power at the bulb connection when it stops blinking, if there is power then there is a connection problem. Check continuity of ground circuit. Clean bulb and connector contacts.
 
Back
Top