Six Samurai
New member
Made this simple press for changing the shock oil today.
I used part of a HighLift jack held in a vise and drilled a couple of 1/2" holes for bolts in a piece of wood.
I removed the air line fitting ,mounted it up side down and pumped the 50000 mile oil out.Measured the oil out of one shock and it was at 10oz.
After draining mounted the shock upright with a fitting,hose and funnel.Had my helper(wifey)hold the funnel and pour the new fluid while I pumped the shock to purge the air and let the oil drain in.Worked pretty good.
Will follow up with the ride results.
I used part of a HighLift jack held in a vise and drilled a couple of 1/2" holes for bolts in a piece of wood.
I removed the air line fitting ,mounted it up side down and pumped the 50000 mile oil out.Measured the oil out of one shock and it was at 10oz.
After draining mounted the shock upright with a fitting,hose and funnel.Had my helper(wifey)hold the funnel and pour the new fluid while I pumped the shock to purge the air and let the oil drain in.Worked pretty good.
Will follow up with the ride results.