CF62 wrong software after unlock

[GSM_HACKING2003]

i unlock CF62 .....after turn on phone , Wrong software

can any one give me solotion for this problem !

 

[sorinm]

same solution as in all siemens phones: unlock again or write good eeprom or full flash. this is not a new problem. files can be found everywhere. if you have problem finding good eeprom i will upload one for you.

br
sorinm

 

[busta-gsm]

you have used sst 5.37 cracked u have to unlock it with martech or just sst 5.31 cracked try this it s 100% tested

 

[GSM_HACKING2003]

thanks.....but if you can upload the soft it's ok

B.R
Gsm Hacking

 

[piye]

For cf62 unlocking use freia 15..18 and select model m55. 100% works. now you have to flash your phone

 

[rubin-miki]

after unlock cf62 like m55 with freia, you must flash phone or not?

Best regards,
Rubin & Miki team from Macedonia
+38948419351
+38975562450
+38970536058
icq 347179449
mailto: [email protected]

 

[flechazo]

Yes .. SST 5.31 is only the best Version Cracked to unlock siemens

ReGards .. Faisall !!

 

[gancellshop]

unlock it with joker..if problem still persist, then flash it. joker works fine for me.

 

[Umbabaraumba]

Use DREAMBOX and all OK!!

 

[Afzaal]

i am Having Problem With Joker.
I made Cut.
When try to Recalc Keys with Joker it shows me Following Error.

Start...
Loading BootsModel(CF62)...
StartBoot does not loded!

When try Change Boot key.
It Shows me this log.
Start...
BootKey: 9FAD9448CE398C6730A09643C8F8E189
Sending PapameterBoot: Ok.
Loading BootsModel(CF62)...
StartBoot does not answer!

I made almost 3 Times from Diffrent Locations.
any help.
Best Regards.

 

[nizou_gsm]

i thinck u must unlock phone or u'r problem is hardware

 

[Afzaal]

No man I don't think its a Hardware.
anyways thanks for ur reply.
BR.

 

[Chris02]

Try new EEPROM adn tzen try recalc keys again

 

[Afzaal]

Sir I Full Flashed Phone
With
CF62_00-100_FF.bin

Log All Okay...

Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SetSpeedBaud does not answer!
Open file "C:\Documents and Settings\Afzaal Khan\Desktop\CF62_FF\CF62_00-100_FF.bin" for write in Flash.
Use file FullFlash (offset block in file = 0x800000).
FullFlash file info:
FlashID: 0001/2212
SIEMENS CF62 Sw22 lg91
RealLgPack: lg91
Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS CF62 lg1 Sw24
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 6601B898 -> PhoneID: 98B80166
OTP IMEI: 356819006052800
HASH: F9CC59A8B770FEAC733D86067DFFBA52
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\CF62lg1Sw24_Backup060817154720.eep" file.
Restore EEP0067 - Ok.
Restore EEP5005 - Ok.
Restore EEP5007 - Ok.
Restore EEP5012 - Ok.
Restore EEP5093 - Ok.
Data file "C:\Documents and Settings\Afzaal Khan\Desktop\CF62_FF\CF62_00-100_FF.bin".
Write Flash addr: 0x800000 size: 0x800000 - Ok.

After That I Recalc Keys.
Also Seems All Okay...

Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com6 115200 BAUD: Ok.
SIEMENS CF62 lg91 Sw22
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 6601B898 -> PhoneID: 98B80166
OTP IMEI: 356819006052800
HASH: 515FDEB511AA37898D1BD3A7DE3FD966
Use OTP IMEI: 356819006052800
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x010000...
BCORE backup in ".\Backup\CF62lg91Sw22_BCORE_060817162602.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\CF62lg91Sw22_EEPROM_060817162627.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

After That i Recharged BATT and try to Switch ON
But Can't ..............All i can see a Black Display

Do u think its a Bad Cut...
any idea?
BR.

 

[Chris02]

It's good if the phone switchs on now

Bleck Display means only bad contrast. Set contrast and all will be fine

 

[Afzaal]

Sorry i can't Power it ON.
No Lights No Sounds Nothing
any Idea?
Best Regards

 

[emso]

you must fully charge batery first in other phone then you have to try to power the phone if then the phone has black displey again you will use joker to change the contrast of the display if joker wrote that the flash write is ok then recalc keys ok then if you dont have hardware problem your phone must work

 

[.::Mystic::.]

sorry i was out of town.
the files in my thread work fine.
download the File (you need to w8 for 18 seconds)
and then flash the V84_FF with V_Klay, if it still does not work then i will provide new flash file.


after all this done and no results then Hardware

 

[hacktek]

Just read here:
http://forum.gsmhosting.com/vbb/showthread.php?t=299371