CF62 problem

[Axe Man]

Hello!

How do I supose to interpret this info, I can see it when I try to put phone in Service Mode:

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 0362 08 0000

I tried to wake him up by Joker, everything is ok


Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS CF62 lg4 Sw07
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 7B9CAED8 -> PhoneID: D8AE9C7B
OTP IMEI: 353486004084590
HASH: D003FAFF5579EBEE48DAE8317FCE96A9
Use OTP IMEI: 353*********
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x010000...
BCORE backup in ".\Backup\CF62lg4Sw07_BCORE_040707201520.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\CF62lg4Sw07_EEPROM_040707201606.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.


I think that info:EXIT: 0362 08 0000 means that something is going on with HW, but I want to ask you. I'm waiting for answer. Thanks

 

[hacktek]

Resolder/replace the processor, see what's happening!
If all is OK, but U still get errors in software, resolder Dialog IC, and if it not works, resolder/replace RAM IC.
For me, it takes about 30 minutes to do all of this!

 

[Axe Man]

Ok, thanks. I'll try it. And next thing. Listen I have AX72 after unlock. Everytihing is ok but phone lose net. I think it's cause of bad TP. Do you know how to repair it ??