CF 110 - White Screen

  • Thread starter Thread starter Ferchi
  • Start date Start date
F

Ferchi

Guest
Hi
I need some help to get back a CF 110.
I have one CF 110 SW 07 (Amena) with white screen.
I made this:
1.- TP ok
2.- 1st Round: Using joker V0341: "calc skey", "send skey", "service mode" and "ReCalc All Keys"
3.- Phone hangs in "welcome screen" or (Amena bienvenido), phone just turn on and off, nothing else.
4.- 2nd Round: "calc skey", "send skey", "service mode" and "read
and calc keys".
5.- 3th round: "service mode", "del instances" and phone K.O. !!!
Before that, phone just shows: white screen.
6.- 4th round: I flashed using WinSwUp C110070101_update! K.O. Phone doesn't turn on..... same white screen.
This is actual Joker info:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 239 (C110)
C110 lg1 Sw07 14.10.05 15:06:55
IMEI: 3575470019xxxxx
DisplayID: 62, Sharp Nec PD161700
FSN: 1B48B6F9
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3947 mV.
SecurityMode: Factory
Get Info...
MobileMode: Service
HWID: 239 (C110)
C110 lg1 Sw07 14.10.05 15:06:55
IMEI: 3575470019xxxxx
DisplayID: 62, Sharp Nec PD161700
FSN: 1B48B6F9
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3902 mV.
SecurityMode: Factory
DSP Firmware Version 00, Power Asic Project ID: 00, RF Chipset ID: 0A
EELITE Info: free buffer 109234 bytes, free at all 109990 bytes, free for deleted 109990 bytes.
EEFULL Info: free buffer 77140 bytes, free at all 224470 bytes, free for deleted 93542 bytes.
Battery Ri measurement: CutOff Idle: 3454mV, CutOff Talk: 3682mV, CutOff Idle: 3405mV, CutOff Talk: 3671mV, CutOff Idle: 3365mV, CutOff Talk: 3604mV, CutOff Idle: 3415mV, CutOff Talk: 3535mV.
Operating time: Total 97405 sec, Current SW 97405 sec.
Talk time: Total 2181 sec, Current SW 2181 sec.
CSD: Total 0 bytes, Current SW 0 bytes.
GPRS: Total 0 bytes, Current SW 0 bytes.
I don't have any backup, just the joker's backup.
Any suggestions?
How can I fix this?
Anyone have this? ---> FF (FF,BC,EEP,LG,T9,)
Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C?
For Joker
PD. Sorry about my english and I hate white screens in Siemens.
 
Contrast is fine.... 178,0

Phone is in white screen, since I press "Del Instances"

Anyone has full flash (joker) for CF 110 sw 07?
Full Flash (FF,BC,EEP,LG,T9,)
Or this? ---> EE_FS?? FFS_A? FFS_B? FFS_C?
 
I' ve flashed Full flash from another CF 100 same version.

Now phone starts, but it hang on startup screen.

I have full backup from another CF 110...

What should I do?
 
dream box is best for seimense phones if u use jocker it is limited for for functions
 
Back
Top