cant repaire a Dead A75 !!!

  • Thread starter Thread starter ti_zana
  • Start date Start date
T

ti_zana

Guest
Hi everyBody, i have here a Dead A75, i've tried to make a Full Flash -A75_8Mb_010C_FF- but no way,
look at tje LOG i got From Joker plz !!!
 
It's bad flash file you are using,use this one
http://www.evilshare.com/639f6ea2-3460-102a-847b-00a0c993e9d6

and set speed to 115200 or 57600
 
Now the HASH is ok ths
but ............ it's not totaly ok yet

Open file "D:\BenQ - Siemens\Siemens2\Flashes\A75\A75_fullflash_v20_lg4\A75_fullflash_v20_lg4.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/220C
SIEMENS A75 Sw20 lg4
RealLgPack: lg4
Start...
Cancel.
Open file "D:\BenQ - Siemens\Siemens2\Flashes\A75\A75_fullflash_v20_lg4\A75_fullflash_v20_lg4.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/220C
SIEMENS A75 Sw20 lg4
RealLgPack: lg4
Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com5 115200 BAUD: Ok.

 
it's flash ic....it's hardware problem....try to rehot flash ic....if this doesn't work...replace...
 
Just want to ask if there is any hope for my A70....With dead boot. I was trying to flash it some times back and was responding fine ..but cable came off the com port. Now phon is dead ...........now boot not responding again.

Any chance of getting it back alive???


thanks

justx24
 
Back
Top