C75i I-Mode Deads...No Power....

  • Thread starter Thread starter dyowei
  • Start date Start date
D

dyowei

Guest
Mr. dagos please help me....

Problem of this phone was auto off...


Ive flashed it with X65 Flasher


and i used SIEMENS_C75_V11lg92_ID_0089_880d_ff.bin flash file


it was pack in a rar file named C75_FF.RAR



now phone is dead...but i can go to SERVICE MODE...


this is the logs of PAPUA




X65Flasher...........





whats the next move now???
 
...after any fullflash, you need to unlock your phone (using papuautils, for example...).
BE carrefully!!! You flash your phone (inside in your phone you have AMD 29LV128MH/L flash chip) with fullflash for Intel flash chip (0089)!!!
I suggesdt to stop any activity and search fullflash file for AMD flash chip. Upload your fullflash file and give to me link to see for which flash chip is...
For unlocking, see bellow:
...open X65papuautils. NOT ENTER IN SERVICE MODE!!! Go to the "Codes" menu and if you have the original SKEY, write in this case. If not, write any 8 numbers in this case. Go to the "Flash" menu and check only "Pause", "??????OTP" and all options in "Recalculate Keys" (if you check this option, automatically is checked the other three options). ONLY THIS PRESENTED OPTIONS NEEDED TO BE CHECKED, NOTHING ELSE!!!!
Click on "Do the Job!" connect testpoint, push shortly phone Power On button, disconnect testpoint (see message -> three seconds to disconnect it), and wait to finalyse ( between reading and writing eeprom segments will have pause somme seconds -> not disconnect). The final message will be : Close all connections...
NOTE: Because you flash your phone with SKEY (i see in your picture) use this key...

dagos
 
...download C75i fullflash file from: http://rapidshare.com/files/191428116/C75i_v22_lg3.rar
Flash it and post papuautils log.
dagos
 
Already flashed....

but can't power on....

do i need to do this????




read codes in papua
 
...you need to unlock it with testpoint!
Otherwise not working!
Remember to check "??????OTP" otherwise yout IMEI will be 000000000..
...open X65papuautils. NOT ENTER IN SERVICE MODE!!! Go to the "Codes" menu and if you have the original SKEY, write in this case. If not, write any 8 numbers in this case. Go to the "Flash" menu and check only "Pause", "??????OTP" and all options in "Recalculate Keys" (if you check this option, automatically is checked the other three options). ONLY THIS PRESENTED OPTIONS NEEDED TO BE CHECKED, NOTHING ELSE!!!!
Click on "Do the Job!" connect testpoint, push shortly phone Power On button, disconnect testpoint (see message -> three seconds to disconnect it), and wait to finalyse ( between reading and writing eeprom segments will have pause somme seconds -> not disconnect). The final message will be : Close all connections...
dagos
 
@ dagos.....

phone is working now....

i flashed with x65 flasher..

and unlock with Furious Gold...


but..keypad are disabled...

i cant press any key...

and even joystick cant use....


i've got error while unlocking in FG...


it says...

can't calculate skey.....
 
...again:
enter in Service mode using papuautils, copy from the right window and post here to see what is happened. Because your phone have I mode (C75I) is possible to be branded to the one provider....
I will loocking for solution in your case.
dagos
 
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Getting Information:
Model: SIEMENS C75 22 lg3
Phone is in "Service Mode"
IMEI: 356270007974206
SecurityStatus: CustomerMode
HWID: 341
Accumulator Voltage: 3771 mV.
 
...after fullflash not working simple calculation. Use the testpoint procedure:
...open X65papuautils. NOT ENTER IN SERVICE MODE!!! Go to the "Codes" menu and if you have the original SKEY, write in this case. If not, write any 8 numbers in this case. Go to the "Flash" menu and check only "Pause", "??????OTP" and all options in "Recalculate Keys" (if you check this option, automatically is checked the other three options). ONLY THIS PRESENTED OPTIONS NEEDED TO BE CHECKED, NOTHING ELSE!!!!
Click on "Do the Job!" connect testpoint, push shortly phone Power On button, disconnect testpoint (see message -> three seconds to disconnect it), and wait to finalyse ( between reading and writing eeprom segments will have pause somme seconds -> not disconnect). The final message will be : Close all connections...
dagos
 
bumping this thread..................


phone working ok now...


thanks to mr. dagos...


but now i cant change language


does this flash file have Language pack for English???
 
C75 -> LG03: English, Polish, Russian, Latvian, Lithuanian, Estonia, Ukraine
Verify this fullflash file using Smelter software.
dagos
 
Back
Top