C75 unlocking step by step:)

  • Thread starter Thread starter szmit4
  • Start date Start date
know you another solution because i try i try and i try and not work
but i try with another phone and work perfectly just 2 phone not work with this solution
thx in advance
 
maybe you chose "save all" ( eeprom tools )?? you must select only 0076,5008,5009 and 5076 and chose "save selected"
 
I have unlocked C75 sw11 lg92 with chaos midlet yesterday.
It means midlet works on sw11
 
Yesi was selected save all But what i need to do now?

In eeprom tool I can turn on service mode in phone, but when i push save selected error appear: Error ?15(Wblockinfoquery) while writing block ? 5008...
You can retry writing, skit this block or abort whole writing proces.
Abort, Retry, Ignore.

I found something like that

"If You have siemens X65, X70 serie any SW wich only "beep" when You try to power on, You gona need:
-PapuaUtilits0.38d(U can use any, but these one is translate on english), 0.46 to work with AMD flash IC-s
-Test Point(no mether what sw is in Your phone!!!!!)
-V_Klay, X65Flasher, MartechII, SST(original) to do a full flash off Your phone
(U don't have to do full flash, try to do the procedure without full flash the phone. If not work, first do the full flash!!!)
Make the TP, put Your phone on cable(COM), run PapuaUtilits and go to section "Flash". Check "Recalculate Keys in Flash" and Papua by hem self, cheks "Replace 76,5008,5009,5077", "Replace Master". It's must be checked too "Pause", and You can make "Make Backup".Put TP on the ground , Click on the "DO JOB". Papua say's "Pause 2" and than You relase TP from GND. Papu starts to doing the job. At the end Papua says "Phone need to be Freeze". Then You go to section Settings off Papua, put Your phone in Service mode(must be on the display off phone), go to section "Various". click on "Read IMEI from phone", and when Papua read IMEI from phone click on "Freeze". Take the phone off from cable. If You try to power on the phone...PHONE IS LIVE AGAIN."


But when i try to do it papa display:

Checking values SKey from page "CODES" ...
Using Skey: 65178525
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0089,880D
SIEMENS C75 356272009698551
HASH: 98D141F557BECC08AA94A1B9F937E97B
OTP ESN: CF423724
OTP IMEI: 356272009698551
All EEP blocks: 198
Not found block52!
Working...BCORE...
BCORE HASH not need change !
BCORE IMEI not need change !
Boot unllock. Exist someth.!
 
I have C75 SW-Version: 11. I was installing java px65v4 and it working ok. Now I have HASH and ESN code. And PapuaUtilsPL051. What I have to do now to unlock this phone? please step-by-step solution.
B.R.
 
wich option ? and wich model for c75 v11 ? with test point or not?
is it possible to work with this soft ? because with papuautils not work
and with x65 unlocker for dima without tp hi read imei just and after nothing
i confused because i unlock today 6 c75 v11 with papua and 2 not work
 
Maybe you could go back to the original post and edit out the bit where it says click "save all"? At present, following your proceedure exactly as it is presented will kill the phone.
 
can you post pictures of steps to unlock using patch an papuas only? showing the buttons to press in a nnumbered order
 
Install the Siemens Mobile Phone Manager software, go to the phone icon in explorer, and put the midlet (the whole folder) under java/apps

Then just run it from the phone menu.
 
But, if bkey calculated wrong boot dont work too..If he clear bkey and make TP then calculate bkey again must work..

BR
 
Back
Top