C65 with bootcore damaged

  • Thread starter Thread starter Birdo
  • Start date Start date
B

Birdo

Guest
Hi, I 've got a C65 dead, and I'm sure that is due to bootcore damaged.
I tell you... I made a full flash read with SST 5.31, without problems. After, with VKlay, I patched this full flash with the patch to enable dev menu in C65. With SST 5.31 again, I uploaded this patched full flash to the phone.
Now the phone does not turn on, and can't enter in service mode, so I can't upload the backup flash because is unable to boot. I've tried with SST, x65 flasher, VKlay and Siemens EEPROM tool and always get the same problem, it's unable to boot and I can't do anything
I've got backup of fullflash and EEPROM made with SST before uploading the bad pacthed flash, and backup of bootcore extracted with VKlay from the backup fullflash before patching.
 
yes it's very good qestion
but can we repair wrong block eeprom with SST (craked)????

B.R.
checiek
happy new year
 
What that have with cracked sst???I didn`t see any diference between cracked and uncracked (only armadilo baypassed)???
What news you have in v5.36,only dongle protected as I see,but cracked work very well.

BTW
I m realy sorry because thay "cracked" it(only one working key was needed) ,because 100Euro in realy not much for that kind of SW.

br
 
If You can't enter to test mode and you cant write flash by x65flasher or SST-GSM you must:
1. Flash by WinSWUP (ex. c65_250400_service) but You must SKIP pre-Check and post-Check.
2. after this your phone can goes into testmode :-). Flash it with x65flasher 1054 and FUBU (ex. C65_new_v12_FullFlash.bin)
3. Repair phone with SST-GSM 5.32

For me it works great :-)

BR
 
2Monty : I have a working C6V and i d like to tansform it to a standard C65
can i u se for exp c65_250100_service or c65_090100_service by WinSWUP to do that ??? and then update it with c65_410100.exe ???
Plz help..
Thx..
 
to Monty
10x bro
i try this procedyre on dead s65 and works great......many beers from me..........10x again
 
Sorry but i don't know that...
but you can make full backup (in SST read flash) and then try
if something goes wrong you can write back your fubu

Best Regards
 
need solution please!i have fullbackup for this phone (32mb) but i can't enter in test mode.....
 
i also have same problem and it can't take flashing and unlocking
just show "pik" and can't go in service mode
is anybody have testpoint pic???????????????
 
i have same problem.i have full backup but phone not enter in test mode .i Flash by WinSWUP c65v25 but update is denied by mobile.why?bad cAble?
 
i use it x65PapuaUtilsV038d_ENG.exe
but show this problem
testpoint is also chek
any suggestion
 
May be you have C6V phone inside /will not accept C65 Swup/ or newnest that 25 version that refuse to be downgraded ...
 
If You can't enter to test mode and you cant write flash by x65flasher, SST-GSM or PapuaUtils shown this problem, you must:
1. Flash by WinSWUP (ex. c65_250400_service) but You must SKIP pre-Check and post-Check.
2. after this your phone can goes into testmode :-). Flash it with x65flasher 1072 and FUBU (ex. C65_new_v12_FullFlash.bin)
3. Repair phone with SST-GSM 5.32 (it can be cracked version of SST)
 
not working with c65 and c6v with damaged bootcore beceause x65 flasher can't write bootcore section
 
Some info is here:
http://forum.gsmhosting.com/vbb/showpost.php?p=1132190&postcount=17
and here:
http://forum.gsmhosting.com/vbb/showpost.php?p=1132142&postcount=33

All x65 phones can be unlocked now (with testpoint method, if You have testpoint picture for your phone model).

P.S. Testpoint picture for S65 needed.
 
I have same thing like Birdo, and the batery was low voltage. The phone does not charge with bad soft. Charge the batery with anoher working phone and after that flash with c65 flasher with your backup but make full eeprom access patch, and afther that make map for unlock and the phone is working.
salam.
 
Back
Top