c65 turn off when connect cable

  • Thread starter Thread starter Satyam321
  • Start date Start date
S

Satyam321

Guest
hi all,
i have not been able to unlock any c65
when i insert the cable c55(china) to c65 phone and check (acc) i.e *#06# and more
the phone just turn off,
what the problem
please help me
 
Hi,
Your C55 cable it is possible to have wrong (or missing) tension on pin1 (autoignition). Try to unlock C65 phones using DCA500; DCA510 cable, papuautils and the java midlet.
For the DAC510 (with autoignition) download driver from:
http://rapidshare.com/files/15829026/usb_boot_adapter_848.rar

br,
dagos
 
thanks for your reply,
i have followed this solution
solder Pin 2,5,6 and 7 together
, now i can see

acc
Plugged in
dca-510

but still cannot connect to papuatuils
 
no need cable modification

u are giving 5 volt from uni box..


dont give ..and yours phone will be connect /


BR
 
Hi,
to use the DCA510 (data cable) with service cable, you need to conect pins 5 (CTS) and 7 (DCD) to pin2 (GND) with 10 Kohms resistor. If you conect pin6 (RTS) to GND (with 10 Kohms) and on pin 1 you have +5v automaticaly your phone enter in charging mode. So, conect pins 5 and 7 to pin 2 (with 10Kohms resistors), install DCA510 drivers and set to COM3 the papua software.
Br,
dagos
 
thnks all for your reply,

i.ve been able unlock a c65 v25
i.ve used ufs and directcom with originally shipped ufs cable(not modified)

the phone can go into service mode smoothly and unlock ok with papua

thnks
 
Back
Top