c65 flash ok,unlock=problem

  • Thread starter Thread starter globalsystem
  • Start date Start date
G

globalsystem

Guest
hello my friend dagos an all gsmhosting member ...


i have problem with c65 when i try to unlock it i get this error:


Checking value of SKEY from page "Codes"...
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,880D (32Mb)
C65 SIEMENS 353663000574713
HASH: 58000F9208130E3EBF10C3C587EBCCD3
OTP ESN: F8982269
OTP IMEI: 354763004010372
Attention: there is no conformity OTP IMEI and records IMEI in BCORE!
We use OTP IMEI :354763004010372!
Bcore R65 series found
Reading of segment BCORE...
Errror of reception of the buffer of data A0000000,00010000
Failure of process of communication with phone
Error at data reading of segment Bcore!
In total Errors I/O
 
...............................................................
Hello my friend,
in the flashing process, you flashed the bootcore area.
So, to solve this problem, you need to use the "trick" presented on http:///vbb/showthread.php?t=566635

Other option is to transform your phone in SL65, but you need first to repair the bootcore....
Best regards,
dagos
 
...not working my friend

i selected many flash files and when i try to put phone in service mode.the phone show service mode but papua 'ont detecte the service mode


i think this phone is dead if you d'ont have other solution MR DAGOS
 
...not enter in service mode (because your bootcore area is changed). Just go to Flash menu, check only "??????OTP IMEI", "Recalculate Keys" (AUTOMATICALLY IS CHECKED OTHE THREE OPTIONS) and connect tespoint. Click on "Do the Job!" and wait to write bootcore area with the good HASH. After this connect in Service Mode (your phone is unlocked).
dagos
 
...remain only one solution to fix your problem. Connect using X65flasher and testpoint, read and save flash from your phone, archive using winrar and upload to rapidshare (send me link in PM). I will try to *******te your problem.
Br,
dagos
 
Hi All
I Have One Siemens C6v Sfr And I Want To Unlock It
Plz Any Help
I Dont Have Box But I Have Serial Cabel
Thanks
 
...first you need to have the serial service cable (like C55 datacable) and papuautils software. If your firmware version is lower (36) you need to unlock your phone using java midlet (Viper, BsReader). Search on this forum how to unlock S-Gold phones using papuautils.
dagos
 
Hi master,
I use papua v1.1.1b to remove "PHONECODE LOCK" error-
it appeared when I enterd 3times a wrong code,
and now,when I use "5008 phonecode" to remove lock it ask to enter SKEY in phone
what's mean that? please help me!!!
 
...if your firmware is lower (36) use midlat calculation. If you use the midlet calculation, first, you need to activate SIMSIM function (enter in Service Mode -> click on Simulate Sim) and after use midlet calculation (presented in the more posts here)....
dagos
 
Back
Top