c65 boot dead ??

  • Thread starter Thread starter arti123a
  • Start date Start date
A

arti123a

Guest
i use papua soft and write new bootcore v 22, after this my hash is FFFFFFFFFFFFF
how to write bootcore from buckup ? my phone only one short "pik" .
please help.
 
ok.phone working ! ufff...
next problem
i have 2 phones x65, when i try connect to service mode, phone not respond, papua with testpoint reading data from bootcore, but i cant write new bootcore
Checking values SKey from page "CODES" ...
Using Skey: 86698152
AutoIgnition...
Transmit Boot...
Boot loaded ...
Pause 2 sec...
Retrieve information...
FlashID: 0089,880D
SIEMENS C65 354736007963763
HASH: 370CD2C41BEA3E0C610BDFA854424B1D
OTP ESN: E4D5A51B
OTP IMEI: 354736007963763
All EEP blocks: 88
Not found block5121!
Write BCORE version: "main_1.0_V22 "
No answer to command receive data A0000000!
Error write segment BCORE!
Repeat procedure !
 
u should full flash phone with x65 flasher by chaos afterwards use papuas or sst to repair
 
i also have same problem and it can't take flashing and unlocking
just show "pik" and can't go in service mode
how can i "update IMEI at bootcore" through which soft
@arti123a
and how u revive it
 
i use it x65PapuaUtilsV038d_ENG.exe
but show this problem
testpoint is also chek
any suggestion
 
Phone's dead or working?

Can be HW problem (try to rehot FlashIC) and try newer papua version (0.75 is out in engl)
 
I have another set which show this problem
i also use new ver papua but same problem show
any suggestion
 
How to write the IMEI in the OTP???? For me the pfone was alive, but i tryed to flash it winth WinSwip flash. I get the mesage "Battery too low, recharge" and after that the phone was dead and OTP IMEI error. So .... how to write the OTP man and with what?????

thx in advice guys
 
Back
Top