C45 "wrong software" NOW DEAD.

  • Thread starter Thread starter DrMobile
  • Start date Start date
D

DrMobile

Guest
Today. I received one C45 with wrong software.. so I wrote MAP with new ID map writer. After write map phone works again.. but after five minutes again WRONG SOFTWARE... So i try to flash it with ALL 3/4 XAK..... and writing map again...
Now phone is dead.. I also try to write full flash with unisiemens but problem is same..
When i try to power ON C45 only give little sound from speaker and no thing more.

Please tell me how i can Revive my C45 again.

Best Regards,
Wahab
 
you no need from full flash It is very slowly.
You need from eep same as the phone.
Use unisiemens to write it into the phone. after that you will have "wrong soft" again. map the phone and your problem is clean. Don't forget eep same as the phone.
I'm sure in my words 1000000000% I test that. Very easy and very fast.
 
Thanks PC.net for reply.

I will try your solution... and post results here.

Best Regards,
Wahab
 
i have same exact same problem with dr mobile and i hope you guys can come up with a working solution because i already try suggested solution above and it did't work. Ps phone i have was brand new and working perfectly before i attempted to unlock. so it's definately asoftware problem.
i'll be waiting
ndagi
 
pc.net is right! for first - flash phone (winswap is best)
second - use unisiemens to write new eeprom
thyrd - remap phone with any mapers

It`s 100% work!
 
hello. i have got thr same problem wrong soft in display i wrote
new eeprom then wrote map but the problem is the same please help.
 
1. Use All 3/4 2.1.0. Write full flash. Also BA20.
2. Write worked MAP. Not power ON!!!!!!
3. Swup Phone. Not power ON!!!!!!
4. Write worked MAP.
5. Power On.

All done.
 
THANKS -=*****nyc=- for your solution... now my phone is power on and working...
Thanks also goes to others.

Best Regards,
Wahab
 
winwap+eeprom+log than map after thais unlock that s all.
thanck you -=*****nyc=- pc.net and porter for your help..
 
Hi *****nyc, i've my c45 dead and i don't understand how revive it with your procedure! What program i must use and where i can find files for this method?

Thanks in advance
 
I have one of this phone. When I try to power ON, it shows a German Phrase, the one I can remember is "AKKU" ------. I guess its saying Battery Low, recharge ????????.
It shows this for 1-3 seconds, and goes off.

Do I try -=*****nyc=- solution ?????

BR
 
Hi *****nyc and friends
I need to revive my c45 because when i power on it says: "Wrong Software" and after 3 seconds go down! So, with Freia and USB cable, when i try to make unlock or flash, the program says everytime: Phone not power on!
How can i connect phone to Freia???? UniSiemens not work with Windows Xp! It's possible?

How i can resolve this problem! Pls explain me, if possible step by step the procedure of *****nyc and what program i must use!

Thanks in advance at all

Bye
 
well i found the 'genuis shadow solution' here for this problem with a few files and didn't work for my c45 but repaired a dead A35(due to bad unlock) with this solution.still waiting for link with good swups *****nyc.
thanks in advance
 
Back
Top