c35i bootfile not accepted

  • Thread starter Thread starter rodeo 123
  • Start date Start date
R

rodeo 123

Guest
Hi there, need help with my c35i.
I did something wrong while unlocking. Now the phone is dead.
Although i can get contact, the screen stays black.
When ill try to flash it says; bootfile not accepted.

What can i do, what do i have to use.
Already thanks.
Rodeo
 
I have a C35i V15. Simlocked. Try to unlock with KSIE, get random error:

boot file 1 not accepted or
boot file 2 not accepted

Using Freia, set boot to normal, also some random errors.
COMM_LoadBoots : selected phone family is 0
TTY_OpenCOMPort : opening Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
TTY_WriteComm : invalid number of written bytes to COM port
COMM_SendBoot : cannot send file

or:
COMM_LoadBoots : selected phone family is 0
TTY_OpenCOMPort : opening Prodigy
TTY_OpenCOMPort : cannot open Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : sending boot 0 for model 0
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : boot file is not accepted
TTY_CloseCOMPort : Closing Prodigy



What is the reason? Bad cable? But I can use Siemens Data Suite with this cable. And this cable is not siemens made.
 
Yes, it is full charged just before my unlocking test.

Maybe I should build at last me self a data cable with the items I bought before 2 years.

Or I should just simply unlock it by Telekom, it's 2 years D2 contract is already expired anyway
 
The easiest way But T-Mobile is a little bit slow. They need about one week to sned you the code.
 
DIY is much more interesting, hihi. I just made a data cable myself and it works, reading -> 6% ...

hehe, I will have something to do now.

/ED
I backed up the flash and battery map, and unlock. Bingo, done!
 
Maybe it is an exception by me. I used my self made cable to read flash out of my C35i and A55 with V_Klay. The baud rate is set to 115200, and I get no errors when V_Klay read the full flash out of both handies.

Compared with that I get error with my no name C35 data cable with every flash tools that I have. And I get read errors(but corrected by software) when I read flash out of my A55.(It is a USB no name cable).
 
Back
Top