Black N73 housing now on cnn.cn

looks OEM to me as well. down to the black gallery and camera buttons, the silver/metallic on the top AND bottom, and the blackish metal for the release on the back.
 
Nevermind, I got the gallery button working. You have to pull on the button-side of the outer housing while you pop the motherboard back in, otherwise it catches and the contacts don't match up. i'll try to get a picture or something to show you.
 
nope. I had a beast of a time getting the initial corner of the housing loose, the walkthrough says credit card but i had to use a really thin flathead screwdriver. And those damn clips around the screen are HARD
 
This thread seems more active than the one I was posting at, so I'll just repeat what I've said and see if I get any more replies:

Problem:
I have a brand new N73 ME, and the faceplate's screen cracked within two weeks. After taken it apart, I've confirmed that the plastic is cracking from the inside because a) I could not feel the crack from the outside b) Two of the major cracks are at the very, very edge. c) I could actually feel the crack on the flipside of the faceplate.

So I've decided to order an "OEM" from cnn.cn:
I've received my order and successfully taken the faceplate off. But it took a while to take it off, thing's snapped on pretty tight.

However, my CNN faceplate also had the same type of cracks; cracking from the inside. This one was even worse because it had several cracks that were "fanning out" from a single point. I was only able to see this when I bent down to pick something up from the floor. Meaning, I was only able to see this on an angle.

So after I've inspected more thoroughly, I noticed a similar crack that I had on my original faceplate, the crack was on the very edge, cracking inside out.

I am beginning to think that many N73s have this problem, but it may be just invisible on some angles. Or that N73s are cheap or that I'm just bad luck and got two bad faceplates in a row (original + the one from cnn.cn).

Flash on to see the deep cracks:


No flash to see the whole cracking situation:


Today:
It's been one (1) week since I got my faceplate and I've emailed Denis at [email protected] and [email protected] with my situation and pictures - but no reply. Has anyone else heard from him lately? Any other ideas to reach him?
 
well the site was down this morning, im banking on them having a failure and restoring the data from a backup. maybe itll show back up later on tonight.
 
each people is recieving different kind of black housing from cnn. who could be speaking the true? so is it worth it to buy FROM CNN?

btw that keypad image fido posted does not have the music key.
 
Ya when I did it way back I found it easier if you put the board back in from the right side first (where all the bottons are) and the to the left for the contacts to work properly
 
I don't know that looks just about the same as the one I got. If you're really worried about the OEM-ness of the keypad, do a search for some Asian N73s. I'm sure someone has an original and has pictures.
 
k guys the video will auto-post to the site when it gets uploaded. I'm going to bed cause 3GSM announcements will start bright and early at 3am Texas Time. Blip says there's 104 min left for it to upload, so look for the video around 10:45pm Central Time. It's bloody long (~45 min) cause I haven't edited it yet. Enjoy, I was freakin nervous as crap, and I almost broke that stupid metal bezel. I'll also try to snap some good shots of the end result, specifically the bottom of hte phone, since i installed it minus the memory card door. DOesn't really make a huge difference, honestly.
 
Back
Top