You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Anyone know where I can find a rear rotor for my '06 c90 cheap
- Thread starter tred8181
- Start date
Feliciaaa. :D
New member
There are trike builders who sell the entire rear ends off C90s. You can buy individual parts like this rotor for $49.95, or the entire wheel tire and rotor assembly. These are very common to find on Ebay for example
Complete wheel and rotor
Good luck, hope this helps.
Complete wheel and rotor
Good luck, hope this helps.
fergilious
New member
Excellent, I'd been searching for them on ebay but for some reason couldn't find them. 50 bucks is an excellent price I'm buying one.
Thanks a lot, this helps mucho..
Thanks a lot, this helps mucho..
*Ms.Star.(=
New member
Would you mind elaborating on what is going on with your original rotor? Is the play getting to large / loose? After how many miles?
iluvcrazeekats2
New member
I've got roughly 30k miles on the bike. The rivets that hold the outer part of the rotor to the hub have all expanded out. There's about 1/2 inch or more of play so it makes a grinding noise when I ride slow.
It was supposedly replaced at 15,000 miles due to a screw up by the person installing my tire. They supposedly replaced the entire wheel and rotor assembly because they took huge hunks out of the wheel.
It always made a funnny noise every so often when riding and squealed like hell sometimes. I couldn't find anything visibly wrong with it until the pads wore down enough to give it some play and when I went to stop one time, the rear wheel shuddered so bad I thought I was going to lose control. No one has seemed to have seen this happen before so I don't think they replaced the rotor and somehow messed it up by banging on it when they were either taking the wheel off or putting it on.
It was supposedly replaced at 15,000 miles due to a screw up by the person installing my tire. They supposedly replaced the entire wheel and rotor assembly because they took huge hunks out of the wheel.
It always made a funnny noise every so often when riding and squealed like hell sometimes. I couldn't find anything visibly wrong with it until the pads wore down enough to give it some play and when I went to stop one time, the rear wheel shuddered so bad I thought I was going to lose control. No one has seemed to have seen this happen before so I don't think they replaced the rotor and somehow messed it up by banging on it when they were either taking the wheel off or putting it on.