Anybody got N95 working on their Mac?

[dru s]

I recently upgraded from an N80 to N95 and I had a setup on my Mac where the Mac would use my N80 using GPRS as a bluetooth model. For some reason this same setup isn't working with my newly acquired N95

All I see is

Tue Apr 24 08:31:41 2007 : Failed to open /dev/cu.Bluetooth-Modem: Resource busy
Tue Apr 24 08:32:53 2007 : Nokia 3G CID1
Tue Apr 24 08:33:03 2007 : Connect script failed
Tue Apr 24 08:33:34 2007 : Hangup (SIGHUP)
Tue Apr 24 08:33:34 2007 : tcsetattr: Interrupted system call
Tue Apr 24 08:33:49 2007 : Hangup (SIGHUP)
Tue Apr 24 08:33:59 2007 : Nokia 3G CID1
Tue Apr 24 08:34:09 2007 : Connect script failed
Tue Apr 24 08:35:04 2007 : Hangup (SIGHUP)
Tue Apr 24 08:35:04 2007 : tcsetattr: Interrupted system call
Tue Apr 24 08:35:34 2007 : Hangup (SIGHUP)
Tue Apr 24 08:35:46 2007 : Nokia 3G CID1
Tue Apr 24 08:35:56 2007 : Connect script failed
Tue Apr 24 08:38:33 2007 : Hangup (SIGHUP)
Tue Apr 24 08:38:33 2007 : tcsetattr: Interrupted system call
Tue Apr 24 08:38:47 2007 : Terminating on signal 15.

and the system.log shows like this

Apr 28 10:14:10 audrey configd[38]: setting hostname to "audrey.local"
Apr 28 10:14:10 audrey pppd[366]: Connection terminated.
Apr 28 10:14:10 audrey ccl[376]: CCLWrite : +++
Apr 28 10:14:13 audrey ccl[376]: CCLWrite : ATH\13
Apr 28 10:14:15 audrey ccl[376]: CCLMatched : NO CARRIER\13\10
Apr 28 10:14:15 audrey ccl[376]: CCLWrite : AT&F\13
Apr 28 10:14:15 audrey ccl[376]: CCLMatched : OK\13\10
Apr 28 10:14:38 audrey pppd[386]: pppd 2.4.2 (Apple version 233-13) started by r
oot, uid 501
Apr 28 10:14:43 audrey pppd[386]: Failed to open /dev/cu.Bluetooth-Modem: Resour
ce busy
Apr 28 10:15:52 audrey pppd[393]: pppd 2.4.2 (Apple version 233-13) started by r
oot, uid 501
Apr 28 10:15:56 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd
Apr 28 10:15:56 audrey ccl[394]: Nokia 3G CID1
Apr 28 10:15:59 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd
Apr 28 10:15:59 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd
Apr 28 10:16:02 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd
Apr 28 10:16:03 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd
Apr 28 10:16:06 audrey pppd[393]: Connect script failed
Apr 28 10:16:06 audrey kernel[0]: ttyiossb00000a: mctl RS232_S_OUTPUTS failed e0
0002cd

 

[goldenbutterfly]

The N95 isn't natively supported by OS X as of 10.4.9, though this should get you up and going.

And iSync drivers, too.

Hope this helps.

BB

 

[William J]

No that doesn't help. those were the steps I had to have gone thru to get the N80 working which it was. It's usually pretty straight forward as long as you've got Ross's scripts. Those same steps don't work for the N95.

 

[rewardsboy 93]

I just got the N95, charging it up, and I'll try to sync it with my MacBook.

 

[m_one]

FYi isync works fine... it's using it as a bluetooth modem that causes it not to work. ie. bluetooth modem with a GPRS connection.

 

[Gulf]

I am having the exact same problem. I try to connect and it disconnects right after it tries to authenticate. Thread subscribed

 

[kirbyforlife69]

http://www.nokia.com/mac

 

[CountryJess]

thats for isync. As stated, isync works perfect. its tethering thats not woring