all Chinese Flash File

[odd1_4ever]

need flash file request for all my friends who are viweing this thread
Modal Name : CECT E768
Song earsplitting





its flashed with wrong file and i dont know which file or version it have orignaly
here is it infinity and spiderman log




COM4 [VCP0] selected
module v2.81
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:86C1:4E72
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.11FEB3D3.[E516_ZDB_E516_GPRS_MT6226_S01.00_0.BIN_60D63C95].rpl
identification#1 detection finished
device-id: 11FEB3D3
identification#1 protocol ver: 04
ver. sw 1: E516_ZDB_E516_GPRS_MT6226_S01.00_0.BIN
ver. sw 2: E516_ZDB.00.0, 6AC3299F
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
Detected ffs/eeprom address is non-standard: 00E00000

Posible reasons:
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\E516_ZDB_E516_GPRS_MT6226_S01.00_0__system_log_11FEB3D3_60D63C95_20090515-091117.B0X.bin
Finished, time used: 153 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

 

[Grey]

with infinity box i get this:
COM18 [VCP0] selected
module v2.80
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6228:8A02:8A02]...
CPU: MT6228
high speed boot On
chip: 0031:0000:0101
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
version: 3.0207
loader: 3.748.0
NAND id: ADF1801D
page size: 800+40
pages/block: 40
bits i/o: 08
address cycles: 04
blocks: 0400
finalize connection...
done
emi configuration...
ram size: 00800000
emi configuration done
check bootloader validity...
done
NOR: 0000:000000000000 [00000000]
NAND: 00AD:00F10080001D [08400000]
NOR chip is not installed
Initialize Done
Set baud ...
921600
Set baud Done
Identification ...
reading bootloader structure area (00080000 bytes)...
detecting bootloader structure...
warning: probably flash chip completely erased, no bootloader found
nfi area detection finished: failed
warning: can not detect chip parameters, default values assigned
Finished, time used: 42 sec
Remove/Install battery now !

WIth Multi-box chinese cocktail i get this
Press and hold power on button...OK
Loading Boot.......OK
CPU ID: 6228-8A
NAND FlashID: ADF1 - Hynix HY27UF081G2M Size:128 Mb
NAND Bootloader ver: V005
Detected 2 Image part(s)
Part 0: 00000001 - 0051AC58
Part 1: 0000002A - 00EB3A9C

With spiderman, i dont get any relevant information
but it also shows:
Hynix HY27UF081G2M

this phone does not have NOR Chip, it Has NAND, that is what spiderman software says when i tried to format using NOR. I tried formatting using NAND, it was successfull but the phone is still not powering on. So that is why i need the flash file.

 

[SolidStateLogic]

add here phone pic and name.. maybe we have it..

 

[nae_butt]

name is A808 Bluetooth, FM, I dont have picture right now

 

[Shortyy : )]

maybe if you have this FW vers: n6500 114 DAYO_NEP_06B_PMJ, i can try it.

i got it here http://forum.gsmhosting.com/vbb/showpost.php?p=3518555&postcount=1

I just want to give it a try

 

[Vincent S]

please do not post flash file for previos request, instead post M320_PCB04_GPRS_MT6228_S02.M3206V10_07_12_V1_3T06D 071217.BIN

I think this is what i want.

By the way, i dont have infinitybox in my shop, i use it at a friend. so please upload flash file for spiderman if possible, you can convert the infinity flash file to spiderman if you can please.

again the flash file i need is M320_PCB04_GPRS_MT6228_S02.M3206V10_07_12_V1_3T06D 071217.BIN

Exact photo is here http://forum.gsmhosting.com/vbb/showthread.php?t=618973. THIS IS THE PHONE I HAVE

 

[Al Snow]

I need china n95 flash file view picture and spider man info

 

[nataliebooo<3]

CECT V8 M678 PCB01 GPRS MT6226 S00 R92 V01 01B09

 

[Rohit.fire]

Try with this file

http://www.4shared.com/file/105683283/376e931a/_2__M320_BOOTLOADER_V005_MT6228_M320V10_07_12_V1_3T06D070810.html

 

[melnat0182]

for which box is this flash file sir?

 

[Joshua T]

it is in bin format can use with spidermanbox,vpro,cpfbox etc or with this flash tool

http://forum.gsmhosting.com/vbb/showthread.php?p=4440449#post4440449

 

[Amers]

Plz post ur phone pic.

 

[IUG]

Try this file

http://www.4shared.com/file/105689890/d5569653/CECTE768MT6226K5L2931CA.html

 

[sweet78]

Plz post ur phone orignall flash file version and ur phone pic.

 

[Heavy Duty]

My phone is n95 8gb facke,

Please give me flash file for respective phone and softwarre for install flash, help me......