All Blackbery solution

Thank you X.ram for the reply. The yellow circle that you marked, what exactly am I to do here? I will try the track ball change and see what happens, but I do not think that the keys not working is associated with this. The yellow circle I assume needs to be changed or bypassed?
 
I have a few phones that are got problems. Here is the list...

1-I have another 8900 that works ,except that it had water damage. I washed the board, but the problem is as before as the flash stays on even with the phone off. Once the battery goes in the flash comes on and stays on.

2- 8300 has a problem with 4 keys not working. The Q,1,A,alt, and space button do not respond. I have changed the membrane and cleaned off the contacts and still it does not work. I have told to give a little heat to the BGA chip and this should reconnect the other connections. Any ideas before I do that?

3- I have 2 8300's that does not turn on, but red light blinks and does connect with the BB desktop manager. When i connect it up to the device manager it comes on and off, well it used to do that. Now it does not do any thing at all.

4- I have a 9500 that blinks 4 times in a row and then once and repeats itself. It does not turn on.

5- I have a 8320 that does not come on or show the red led.

Thank you so much for the post and I am charging up the first 89oo to change the track ball.
 
I tried the new trackball, but the same problem is there. I guess it must be something to do with the yellow circle. What can I do next? Thanks again!
 
HI

You can update firmware there is no problem with firmware after finish firmware u have to change some setting Go Option Advance option network setting change the network mode change Globle network to Gsm network thats it

..::X.Ram::..
 
sal
wher can i see what version ot display have my blackberry 9000 .
i need new display because old has broken,and i don't no what version to buy
thanks
 
after erasing bb7230 with mfi multiloader ,.now i cannot load with desktop manager.,,unable to load make sure the device properly connected to cradle ...solution please
 
@x.ram
i had received one 8700c for unlocking ,to read mep code i wiped the set with one software given on the forum now set not fully on stopped with some ic on with no 507 below this how can recover plz guide
 
Hi
In Blackberry few devices have these problem there is a serial number is there back side on display like 004, M series etc and you have to use same series of display ok.


..::X.Ram::..
 
Back
Top