All about papua here-->newest versions-->questions

  • Thread starter Thread starter Chris02
  • Start date Start date
Any Chances of Getting new Latest Version in Full English.....Even its Result in Windows Also In English.U know the Stuff been Goig on when Unlocking Phone....Thankx
 
ME75 V22:
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting power on phone...
Getting Information:
Model: SIEMENS ME75 22 lg3
Phone is in "Service Mode" mode
IMEI: 357
SecurityStatus: CustomerMode
HWID: 5004
Accumulator Voltage: 3803 mV.
Calculation of keys...
Keys calculated successfully:
BootKEY: E09CEFDD195D61FAF93C892C6BB52359
SKEY: 61155990
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
OTP ESN: 2995E01C
Reading Bootkey from EEPROM...
BootKEY: E09CEFDD195D61FAF93C892C6BB52359
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting power on phone...
Getting Information:
Model: SIEMENS ME75 22 lg3
Phone is in "Service Mode" mode
IMEI: 357
SecurityStatus: FactoryMode
HWID: 5004
Accumulator Voltage: 3803 mV.
Checking values entered...
Saved C:\Documents and Settings\Mode\Desktop\357.log
HWID: 5004
SKEY: 61155990
BKEY: E09CEFDD195D61FAF93C892C6BB52359
[Model: Siemens A50][PhoneID: 1CE09529][Desired IMEI: 357]

Block EEP76 saved.
Block EEP5008 saved.
Block EEP5009 saved.
Block EEP5077 saved.
Blocks were written to phone.
Phone disconnection...
Phone is Turned Off...
Phone is OFF (closed)!

Keys readed thanks to SST midlet, but sad that no SST, no Martech readed OTP IMEI, and did with ... You know what soft.

B.R.
Alkapone
 
It is very good when you search and read a lot my friends and keep yourself informated and in update. If you read old posts you will learn,how to use it and you even can find some english/deutsch versions (not the latest,but usable) too. Don't be lazy! Go to read and learn!
 
I unlocked two CF75 using px65v5 is working fine, I also notice that it works a little faster. Have not tried px75v1. Also would like to ask it there is a newer verison of Siemens EEPROM tool.exe 3.15.

Thanks
 
Very good to make sticky this thread
The last version is 0.6.9
You can find it here
http://papuas.allsiemens.com/x65PapuaUtilsV069.rar
 
I have a DCA-500, but I couldn't unlock my S65 (SW-version 16)
Papua don't recognizes my phone
 
sorry, but i think there is not px75v2, px75v2 u can find at Chaos' page
http://chaos.allsiemens.com/software.html
 
Just wait some time;
When I finish I will give ENG source to Gehstock to update new versions.
Regards, ddgsm.
 
Could You say something more about it ??
Like what models supported (C72 v22 x68) and who made it ...
 
Here is the English - translated full of x65PapuaUtilsV079 :

http://briefcase.pathfinder.gr/download/526184

Enjoy !....
 
mate,how to unlock this c72 v22 this is the log?i use papuaUtils 0.7.9g

Auto Ignition...
Boot not loaded!
Boot released.
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
No answer to boot!
Boot released.
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0001,227E (32Mb) ...(amd)
C72 SIEMENS 3573640023xxxxx
HASH: 76C945D35BFABD72338F3327AE7ADB2F
OTP ESN: 9D346862
OTP IMEI: 3573640023xxxxx
Total EEP blocks: 233
Blocks 76,5008,5009,5077 found.
Block 5009 does not require replacement!
Old block 5008 saved in C72_357364002344348_EEP_061012095916_5008
Error in confirmation code to command Erase segment 0001AAB5!
No confirmation to the command Write segment 0001AAB5!
 
another one ...

IMEI: 354764001xxxxxx
ESN: 25EFB2A6
HASH: 2B5CFA98559BD46015097631FCB079A3
Further use "Calculate SKEY and BootKEY"...
Calculation of keys...
Keys calculated successfully:
BootKEY: F6CDE72747950BC13A302E168B2CBB43
SKEY: 30282494
Boot in "Service mode"...
Press RED key (Power ON!)
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting power on phone...
Getting Information:
Model: SIEMENS C65 43 lg1
Phone is in mode "Service Mode"
IMEI: 354764001xxxxxx
SecurityStatus: CustomerMode
HWID: 327
Accumulator Voltage: 3946 mV.
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key" (SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode
Checking values entered...
EEP Block 76 saved.
EEP Block 5008 saved.
EEP Block 5009 saved.
EEP Block 5077 saved.
Blocks were written to phone.
and ...voila ..another one Unlocked

br
sm4rtboy
 
Thx Sir


1 Question..This New Midlet Only For S68,E71,EL71 Or We Can Also Use This Midlet For Other Models ,Old Versions ?



BR
 
All about papua here-->newest versions-->questions

With a foreign fullflash you should have tried something like this :

If the telephone was flooded with a totally foreign Fullflash together with Bcore(!)
 
No it didnt work with the me75 automatically but i had to enter the hash and esn manually :-)

This Program is the best because it is easy does not need flasher_pxv5 and is an all in one program. From wich forum did you get it??

Now all is ok

THX
 
Well, Just for UNLOCK, you can use the "Java Midlet" method - then calc. SKEY + BKEY from HASH & ESN , Send SKEY to phone -boot in Service mode, then with "Freia.log" button when offered to save the log press 'Cancel' to be offered to 'write blocks directly on phone'.

This works always, since it uses BFC commands...

It appears that there is a difference for C72 compared to other models...

What I had incorporated in 079g English , for the "Flash" page or TP booting, is the support of the Amd/Spansion 0001/227E flash regarding the correct Reading of OTP IMEI and also correct calculation of ESN !
I can guarantee that these are correct !

But it appears that there are other differences, at least for this model, when working in "Flash" page, That I don't know... And I don't have a C72 for tests...
So it is better not to use the functions of "Flash" page with that model ...
and that version of PapuaUtils (079g Eng.)
Except for getting IMEI, HASH & ESN with TP booting (Only 'pause' checked) ... And probably Save EEP blocks or Reading FullFlash...
 
Back
Top