a70 v32

  • Thread starter Thread starter robinhood
  • Start date Start date
R

robinhood

Guest
Start...
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A70 lg98 Sw32
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: 333F1728 -> PhoneID: 28173F33
OTP IMEI: 356471008290374
HASH: 5D9C52AF8AFEEB2D81558D9B55571820
Use OTP IMEI: 356471008290374
USE SKEY: 01864420
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xBC0000 size: 0x030000...
Error Read Flash block 0xBC2000 size 0x002000!

i tried to unlock this phone with testpoint but always error whats wrong

regards
 
hi
i use 3.4.3 i even use 3.5.3 and 3.5.4 inofficial and i have error again.

regards
 
No ! 3.4.3 is best for A70, I dont suggest you to use older ones,

Try to set the lowest speed and retry !

If same, use another cable (USB-to-COM or UFS->COM) with higher speed than 115200 !


Regards,
B
 
In some cases 3.4.3 can't flash A70, but 3.0.6 can . I know it from personal expirience.
@robinhood
Post result!!!
 
I have one dead A70 and with last version of Joker (3.4.3 or higher, tomorow i can tell u wich version) the phone can't flash!!! I tryed with 3.0.6 and the after flash the phone was OK . Why u ask?!? U think I'm a liar???
 
I have never used "higher version than 3.4.3", and I havent had a problem flashing A70 with it (but A65 !!), can you remember what flash ic did that A70 had ?
 
Sorry, can't remember. With higher versien i get error on some of the eeprom adreses.
 
Has anyone got solution for this
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6
It became like this after unlocking with tp.Tp is normal.Phone goes to service mode and info is ok but can't power on.
Please help thanks
 
soon joker all models fixed will be released.
just need to know the bugs in each of the models.
 
As your SX1 calc ?

@ systemworn

That error on phone display?
Whats the phone model, A70 ? Have u seen sticky thread ?


Regards,
B
 
the calc kind of didnt work.
but you can try it if you want.
tested on a phone but no use.
 
Thanks after rehotting all details flashed with another version and phone was alive again,but I think it was a software problem.
Thanks for attention
 
bb-gsm is a siemen master , thank for you great work bb-gsm . you solusion is work 100% , tested for me .
 
Back
Top