.....:::::a70 big problem unlocking:::::.....

  • Thread starter Thread starter SHIJILFONOTLY
  • Start date Start date
S

SHIJILFONOTLY

Guest
DEAR FRIENDS,
I HAVE SIEMENS A70 WITH SIM SHOW
*DISABLED PROTECTION CODE*
HOW TO REPAIR THIS?
AM ALLREADY CUT TP
CHECK THIS
SERVICE MODE DETAILS
Code: 
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 241 (A70)
A70 lg7 Sw37 15.05.06 15:16:13
IMEI: 359068009923271
DisplayID: 52, Hyundai D0986EF
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE 
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4179 mV.
SecurityMode: Customer
RECALC ALL KEY USING TIME THIS ERROR
Code: 
Start...
Phone off!
Loading BootsModel(A70)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A70 lg7 Sw37
Soft FlashID: 0001/221D
FlashID: 0001/227E-221D-2200
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 64Kb
Start EEPROM segments at addres 0xBC0000
FSN: D8C25028 -> PhoneID: 2850C2D8
OTP IMEI: 359068009923271
HASH: AAC241C775A7F484F43C2D5B4C7311C2
Use OTP IMEI: 359068009923271
USE SKEY: 07412232
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xBC0000 size: 0x030000...
Error Read Flash block 0xBC0000 size 0x004000!
AM USING JOKER VERSION 0.3.5.6
COM SPEED---115200
BOOT TYPE---NORMAL
PLS HELP ME OR PLS GUIDE ME
 
Bro,how to u?
U have this software
i have no idea with out nokia
pls guide me
 
you need write a good eeprom to phone and try to recalc all keys again with joker, all will be fine...
 
recalculate all key is using for repair, not for unlock.
for unlock need only recalculate field 5008.
calculate skey, enter skey in phone and clear only field 5008.
with this metod work 100%, and no dead phones.
 
JOKER - 3.5.6
Use Comport Cable & Com speed 57600.

Go to Service > Than Service mode > Press Read+ Clack all keys.

At Skey > Clack Skey > Reclack All keys.


Try this & Post result.






DREAMS UNLOCK.
 
Yes, with prolific cable will work with hight speed.
With ftdi cable will work with problem.

Code: 
Read EEPROM addr: 0xBC0000 size: 0x030000...
Error Read Flash block 0xBC0000 size 0x004000!
Better is com cable and low speed for this phone(here is your problem).
And not need make recalculate all key.
This can kill phone.
And repair A70 for beginer is not so easy without backup.
only field 5008 need be changed.

Before make some with unlock, read eeprom.
if software read without problem, you can proced with unlock.
 
bro,am upoad pm now set is dead
but service mode enter but no go to normal mode
wht can i do
pls help me
 
Back
Top