A62 Turn on and in 2 seconds Turn off

[skippynel]

Hello ppls.. i have Siemens A62. when i'm trying to turn on the phone.. it's turn on.. but in 2 seconds it's turn off.. what should i do . .?

 

[..:HGSM:..]

it's flash problem ....flash your phone

 

[skippynel]

i've flash it .. but not working . . for flash i used .. Joker v0.3.1 .. and flash file a62_full_0604.bin .. with SST .. Entering Boot Mode and it's stoped . .

 

[..:HGSM:..]

fullflash and repair with sst after test point

 

[systemworm]

You just needed it to format your phone in service mode but you flashed it

 

[skippynel]

thnx guys .. Now my phone it's ok.. full flash and contrast tool and it's done

 

[FullFLASHgSMPH]

Open file "E:\Non-Nokia\siemens new\joker\JokerV034\A62lg98Sw07_80-80_FF\A62lg98Sw07_80-80_FF.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/220C
SIEMENS A62 Sw07 lg98
RealLgPack: lg4
Start...
Loading BootsModel(A60)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A62 lg98 Sw07
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: BD0221FA -> PhoneID: FA2102BD
OTP IMEI: 355753000216593
HASH: 066C5B05B7986BC87FE53072FCF02C4D
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\A62lg98Sw07_Backup060423181730.eep" file.
Restore EEP0067 - Ok.
Restore EEP5005 - Ok.
Restore EEP5007 - Ok.
Restore EEP5012 - Ok.
Restore EEP5093 - Ok.
Data file "E:\Non-Nokia\siemens new\joker\JokerV034\A62lg98Sw07_80-80_FF\A62lg98Sw07_80-80_FF.bin".
Write Flash addr: 0x800000 size: 0x800000 - Ok.
Start...
Loading BootsModel(A60)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A62 lg98 Sw07
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: BD0221FA -> PhoneID: FA2102BD
OTP IMEI: 355753000216593
HASH: 066C5B05B7986BC87FE53072FCF02C4D
Use OTP IMEI: 355753000216593
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\A62lg98Sw07_EEPROM_060423184234.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.


USE JOKER 100% DONE TO ME TODAY

 

[354boyo]

i know joker can fix this, but i need firmware for a62 anyone have it ?
i use firmware c60 but phone still dead only buzzz,
plz give me the result

 

[BCcommunication]

http://evil-hackers.com/SST/

 

[BCcommunication]

tested firmwareb 100000000000000%

 

[.:.GSM-ANGEL.:.]

How to make test point in siemins A60 before flashing, please help,
when i try to flash i displys "Boot file not accepted".. please help anybody..


WBR
A@DIL

 

[murtaza_nns]

Hi dear try this one picture