a55 dead

  • Thread starter Thread starter bessem
  • Start date Start date
B

bessem

Guest
i have a siemens a55 dead
i want to flash it with joker but always i have this message

Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
MainBoot does not load! Error boot CRC or RAM!
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
MainBoot does not load! Error boot CRC or RAM!

thanks in advance
 
and try with other cables
I had similar problems with Joker, trying different cables often helped
 
1st try to Recalc keys what Does it say? and
Better download magic file for A5x Models from evil-hackers.com/BB-gsm
Best Regards.
 
just ues that joker and click on service mode and delete instances no need for flashing phone ok
 
An Other Comes!
A55 Dead After Flashing Just See...
Start...
Cancel.
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS A52 lg1 Sw05
Soft FlashID: 0089/0016
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xBA0000
Warning: Not valid addres Start EEPROM in set phone model!
FSN: 6575DC5D -> PhoneID: 5DDC7565
OTP IMEI: 351855003870880
Warning: The software of the telephone does not correspond to FlashID!
HASH: 1443F6559615E0229F876EA6619E60F4
Use OTP IMEI: 351855003870880
Error: Not valid addres EELITE in set phone model!
Open file "D:\UNLOCKING\ALL ABOUT SEIMENS\E-Gold\Joker\Joker Flash Files\MAGIC File For A5XX\Tested\A5x_4-8Mb_MAGIC_FF\A5x_MAGIC_FF.bin" for write in Flash.
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS A52 lg1 Sw05
Soft FlashID: 0089/0016
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xBA0000
Warning: Not valid addres Start EEPROM in set phone model!
FSN: 6575DC5D -> PhoneID: 5DDC7565
OTP IMEI: 351855003870880
Warning: The software of the telephone does not correspond to FlashID!
HASH: 1443F6559615E0229F876EA6619E60F4
CRC error in transfer buffer or bad RAM! (Block at 0x800000).
****** Joker Siemens EGOLD Phone Version 0.3.4.3 closed. ******
****** Saturday, September 23, 2006, at 16:03:19 ******

No More Powerup Any Clu?
BR.
 
Afzaal, use FREIA, make backup of Firmware and Eeprom from a good, working phone (ver.11 is the best) and flash FIRMWARE backup and Eeprom!
After that, make Unlock (Use Original IMEI) with FREIA.
It will be working 100% if the phone has only software problem!
If you don't have a good phone for making Backup, I will send you the correct files!
 
brother!
Problem was after some moments phone always went to Wrong Software.
means 1000% Software Problem.
that will be gr8 help if u send a good flash i will PM u my email address.
or Upload to ur site.
BR.
 
Yes, if it is software problem, just flash a good backup Firmware and EEprom (Must flash Eeprom because is very important), and Unlock. I will upload good backup tomorrow, because I have them at workspace!
 
ftp://home.railgun.ro/Siemens/1_Egold/Repair_Flash/

Still Nothing Uploaded for A55
BR.
 
'
Soft FlashID: 0089/0016
FlashID: 002C/0017
'

That flash file is wrong in this case, you should use flash with ID: xxxx/xx17

Check at evil-hackers.com/BB-gsm C55 flashes !



Regards,
B
 
thanks for ur Reply Sir!
But My Phone is A55
Do u think C55 Flash will Workout?
Best Regards.
 
Hi master Bb-GSM,
see the joker log below flashed with the magic flash:
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A55 lg1 Sw11
Soft FlashID: 002C/0017
FlashID: 002C/0016
Flash Size: 4Mb, WriteBuffer: 32 bytes
Region(1): Blocks 32, Size 128Kb
Warning: Not valid Flash Size in set phone model!
EEPROM segments not found!
FSN: 828F5135 -> PhoneID: 35518F82
OTP IMEI: 354643000396373
HASH: 1EE6FC6657805DF41A469A8E5264320E
USE SKEY: 00000001
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Change BCORE HASH - Ok.
Data file "E:\cdc\Siemens\A55\A5x_MAGIC_FF.bin".
Write Flash addr: 0x800000 size: 0x400000 - Ok.

But phone does not turn on. Just blink and sometimes buzzz . Have tried also unlock it using freia with use original imei selectec but the messange "COMM_UpdateIMEIBlocks : update is not accepted" comes up.
Would you help a little man?

tks you in advance.

B. R
 
I have the same problem. i also use the magic but still blinks ones and nothing. I think i just saw my software & flashID last number is different like yours:

Soft FlashID: 002C/0017
FlashID: 002C/0016

So i'm goin to flash with same as the first original soft flashID. Remember that after flashing the wrong one, next time it will appear so you need to flash the 1st twice if it does not one at the first

Don't forget to unlock.
 
Back
Top