a31 problem unlock help????

[pegonlo]

Hello i have A31 work ok ,no unlock good ,i used Joker the last unnoficial version,push skey recall, in read mode,i have error in block 0x7b0000 size 0x004000, i need unlock this fone ,Thank very

 

[hacktek]

First, you must cut the TestPoint.
after that, select CF110 in Joker 0.3.4.3, and press ReCalc All Keys!

 

[pegonlo]

i have solution for this problem,ihave used old joker and select cf110 y al 1000%
Thank...

 

[Uzo Daddy]

@hacktek thanks for that nice idea.
would try, and post.
thnks again.

 

[summer_20xx]

100000000000% working.

 

[beo_tech]

the cable pin out plz

 

[beo_tech]

i get it thanks


Here is the Pinout

AF51, A31


Pin Signal
3 = Rx
4 = Tx
5 = GND
7 = Ign

 

[Uzo Daddy]

pls cut t.p and done the steps, but fone not find boot.
meanwhile just used on af51 and work o.k.
any idea
br

 

[hacktek]

You haven't cut the right TP, or haven't cutted deep enough! Look with magnifyer, the track must be cutted!
Use a medical service needle!

 

[Steamroller]

try lower baud rate or another com or PC
sometimes I get same errors but when I try again it works (on a slower PC ex. 450MHz always work)
BR