a31 ClearFlashSeg at

  • Thread starter Thread starter real_shadi
  • Start date Start date
R

real_shadi

Guest
hi
i have a31 blank lcd and turnoff
i flash it on joker by ufs cable and jaf com emulator
but alwes giv me error ( ClearFlashSeg at 0x000000 does answer )
 
i think you are using direct com on ufs to simulate com port :-? on some ufs i also face this error ...

try Uni box or any other box for port and check ... will be ok
 
if you are using com emmulator than change baud rate to 57600 and boot type to bcore bug
 
you no need to flash u must write eprom file your first adress is "7A:0000" and second adress is "006:0000"
 
after i got the this message phone didnt boot again..no booting.. over joker or martech...

HASH: 04FD35E359DB9A00A86CFA05857FDCFC
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 14 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\A31lg1Sw09_Backup100523180912.eep" file.
ClearFlashSeg at 0x000000 does not answer!
 
Back
Top