96 honda passport cylinder not firing?

  • Thread starter Thread starter C.J. s
  • Start date Start date
C

C.J. s

Guest
Ok i have a 96 honda passport and every 50 miles or so i have to take out the plug and clean out the hole cause a small amount of liquid collects there i have heard all kinds of things and theories if anyone can help.
Sorry for not clarifying it is at the end of the spark plug where the ignition coil connects to the spark plug.
There is a tiny amount of coolant, or oil not sure i tested it a while back but can't remember.
 
Well sounds like that hole is getting to much fuel (maybe that injecter is messed up)
or that spark plug isnt firing all the time try a new one and maybe a spark plug wire
 
Is this a spark plug mounted through the valve cover? and you're getting fluid built up around the end of the plug that is ceramic, if thats whats going on you need a valve cover gasket replaced
 
it could be gas or oil on the plug. if it,s gas then you probably either have a bad plug or wire.if it,s oil on the plug then it could be valve seals.if your talking about on the threads then you probably have the valve pan gasket leaking in that 1 place.
 
Back
Top