T
Todd A
Guest
The 30-Amp fuse (Mounted on the Starting Solenoid) continually burns out if you try and start the motorcycle.
I jumped the Fuse with Wire and still nothing except a very hot wire but still no lights and no starting. The Start Button does not work at all, the Gages do not work, the Neutral light will come on for a brief second but then off, when the wire is in place, the light still will not come on..
If I apply 12 volts (Power using a Power Probe 3) to the Yellow Wire with Red Strip, I can get the Motor to turn over but no spark when grounding out the Spark Plug externally but the jumper wire gets really hot?
I am thinking that it is either the Kill Switch or the Ignition Switch. Does anyone have some information to allow me to continue to troubleshoot the bike?
I jumped the Fuse with Wire and still nothing except a very hot wire but still no lights and no starting. The Start Button does not work at all, the Gages do not work, the Neutral light will come on for a brief second but then off, when the wire is in place, the light still will not come on..
If I apply 12 volts (Power using a Power Probe 3) to the Yellow Wire with Red Strip, I can get the Motor to turn over but no spark when grounding out the Spark Plug externally but the jumper wire gets really hot?
I am thinking that it is either the Kill Switch or the Ignition Switch. Does anyone have some information to allow me to continue to troubleshoot the bike?