2003 ford ranger hard going into gear?

[turbo_diesel08]

i have a 2003 ford ranger with a 2.3 liter 4 cylinder 5 speed manual transmission that has trouble going into gear, it's mostly from a dead stop that i have trouble going into gear...the clutch slave cylinder is working properly...it's not leaking any clutch fluid...it's also been bled the clutch...what could be wrong?

 

[crazyem]

mine's been ornery lately with the cold, but I'm also probably about due for a new clutch. don't know what else to tell ya.

 

[Family Man]

Synchronizers could be going bad in it

 

[Handyman]

You may just be low on gear oil , Find the top plug on the side of your tranny and remove it ,if it does'nt run out when you remove the plug stick your finger into the hold and see if you feel oil , if not you need to add some gear oil , like a 80- 90 w gear oil.

 

[TJ]

see if the vehicle will go into gear with the vehicle parked and off. if it will the syncros should be fine if not it should go into all the gears except the ones that are having syncro problems.