Nothing Runs Like A Deere
New member
we have a 01 dodge 24v cummins and we were instllinga fuel pressure sensor right where the fuel goes into the injection pump and once we got it in and were ready to blead thfuel spit out a little bit then stopped coming, lift pump runs but we are not getting feul, we took the filter cap off and the filter bowl isnt even getting fuel, fuel tank straight #1, (its about 20 below), there is only two things that i can think of, when we put the sensor in the line got moved just a little (50% steel 50% rubber line) if it would have kinked on the steel part, the other thing is they didnt have a heat shop so we just lit up a knipco heater if we could have thawed out some water in the lines and then it froze blocking the lines or the pump, the pump runs when the starter is bumped and shuts off after bout 20 seconds or so, wondering if the pump could be out, ran fine up until we started putting the sensor in