At what AC voltage do these subs explode... I am currently running them at 2 ohm and my mono block amp has maxed out at 31 volts with the normal math places my amp at 480 watts "speaker max is 600" but I know that 2 ohm loads bounce a lot if I get a bigger amp will I increase output a lot or will I just be wasting cash I have to lower the output for rock but I feel rap is not loud enuf the sound level is awesome in the built to factory spec large ported enclosure but I dont want to throw anymore money away. If you are running a combo like this let me know what your system is like
I have them in a built to spec ported box.... 2.25 cu ft per sub with the ports kicker also recommends.. I just want to know if the low end kicker stuff can take a beating its still kicker and im sure it beats the crap out of the no name junk.... BTW... you put a Digital Multi Meter on the speaker leads and set it to av voltage.... take that number multiply it by it self and divide it by the ohms and you get max watts... i am getting 31 volts
I have them in a built to spec ported box.... 2.25 cu ft per sub with the ports kicker also recommends.. I just want to know if the low end kicker stuff can take a beating its still kicker and im sure it beats the crap out of the no name junk.... BTW... you put a Digital Multi Meter on the speaker leads and set it to av voltage.... take that number multiply it by it self and divide it by the ohms and you get max watts... i am getting 31 volts