1998 dodge dakota high beam indicator will not lite when high beams turned on?

  • Thread starter Thread starter ca21a
  • Start date Start date
you probably got a bad switch on it,try checking for power at the lights when their on high beam if there's no power then the switch is out,it can also be a bad relay ,but on those the switches caused more problems than relays did,the light in the dash can also be burned out causing it not to work,you can also check at he connection point at where the wires come out of the switch to verify there's no power coming from the switch,that will also make the light in the dash not come on,good luck.
 
Your high beam indicator light could be burned out. Go to the auto parts store and tell them you need a light bulb repair kit.
 
Are your high beams switching on and off as they should?

If they are, there is a signal wire coming from your dimmer switch that travels to the high beam indicator and the fog light relay. If this connection is broken, the indicator will not come on and the fog lights will not turn off.

If your high beams are not functioning, check your dimmer switch and the connections to it.

Good Luck!
 
Back
Top