wellerfan_uk
New member
I am having trouble with the driver side electric window going up and down, (although it went down better than up.) I removed the window motor and mechanism and hooked the power back on, the mechanism seemed to be working fine, it was moving up and down freely. After a good spray of WD-40 and a final recheck (Great!! everything was still ok) I installed it Before putting the window back in I checked it again Hmm there was a problem when it was going up, seemed to be struggling a bit. After bolting the window back into place the problem was nearly as bad as before, opening the window is fine, very smooth but going up it starts fine(ish) but about a quarter of the way up it stops and makes a "Cranking" noise and does little else, after pressing the switch a few times it would maybe move 5mm and start "Cranking" again until it does nothing but make a "Cranking" sound. I eased it up with my hand While pressing the switch and i managed to get it shut (More hand power than electric power.) The Haynes manual offers little to no assistance regarding electric window mechanisms. Please help me. Thanks