T
the_eliminator444
Guest
this is n regards to the Dodge Ram 150 van i asked about before, i put the new gasket for the head back on, bolted everything down, tried to start it and the starter tried to turn it over but it couldn't, batt full charge. to give a brief history (dont go bonkers or i won't read ur resonse) my ram was overheating for awhile, it finally gave out on me when i drove it back, the old gasket was busted up in the jacket areas. water pump had been replaced, still losing coolant/water. pushed up hill, cranked, water came out of spark plug sockets, oil wasnt then but now is milky. new head gasket will not leak on outer edges but on the inside between cylinders water was leaking. i lost coolant fast, again holes leaked again.., cylinders where a little rusty, no oil pan leak so idk about pistons yet, engine cant be turned over at all with new bolt, or s-plugs out. is my engine hydrolocked? is rust causin the lock up? we've already poured anti rust liquids down it but still hard to turn.
and the starter is still trying to engage, pistonsdon't seem broen, no oil leak but dip stick was milky, and block water was rusty when drained but rust can be removed.. and is..
and the starter is still trying to engage, pistonsdon't seem broen, no oil leak but dip stick was milky, and block water was rusty when drained but rust can be removed.. and is..