1 none stock speaker doesn't work on toyota tacoma 97 xtr cab?

  • Thread starter Thread starter Artem S
  • Start date Start date
A

Artem S

Guest
Toyota Tacoma 97 Extra Cab

Vr3 stereo "VRCD400-SDU"
front speakers sony Xploid 45 w rated power, 4 way "xs-r1641"
back speakers dual illuminite "TS" 50 w rated power, 3 way
size on speakers 6.5 inch
+small amp radio antena "amp wire is not connected"
speakers are in same place as old speakers, back speakers use stock wiring exept for lighting, front ones have new speaker wire.
Ok
so my front right speaker "doesnt work" anymore, i tested it at home on stereo and it worked fine, what happens is, when i connect it no sound comes out of speakers when, i connect it when everything is on and playing u can only hear low cracking static sound from it, WHY?
Also when i switch to radio my clock dies??
and my back right speaker pops when u turn on or off the car, but its connected same as left one??
 
It sounds as if either the speaker cable has a split in it and it is touching on metal somewhere or when you bolt the speaker in place, the terminals are touching on the door somewhere and causing the speaker to short out.

Its shorting out somewhere, so I would be tracing my wiring and finding the break, or where something is touching on metal.
 
Make sure you don't have the wire backwards, then start by replacing the wire you could have burned it, then move to the amplifier trying moving that speaker do a different place on the amp if it starts working then you gotta bad channel on the amp.
 
Back
Top