09 Touring PCV and Auto Tune

H

Harrie

New member
Bought and had PCV and Auto Tune installed at Sturgis last month. Due to some unforeseen issues with our 2009 HD Ultra Classic Electra Glide last week, we decided to trade it for a 2011 Electra Glide Ultra Limited. I was hoping the PCV and Auto Tune would work with the 2011, but there are too many differences, primarily with O2 sensor changes on the 2010 and 2011 models that this unit cannot be used with the new bike. The PCV and Auto Tune only have about 450 miles of use and is one month old. What do you all think would be a fair price?
 
The Auto Tune will work on the 2011, you just need to have the 18mm bungs in your head pipe. If your PC-V has a build date newer than 5/2010 it will work on the 2011 bike as well. You will just need to load the 2011 map. The build date can be verified by the first 4 numbers of the PC serial number which can be viewed in the software or on the silver sticker on the unit.
 
Assuming your PC-V build date is within range and are good to go with that, you might as well check out FuelMoto's header which will get rid of the cat and (if I recall correctly) has the provisions for the current (small) as well as the previous (larger) O2 sensors. Then you'd be good as gold.

Regardless, I'd scrap that cat asap if for no other reason than the heat issues.

Best of luck.
 
Back
Top