Search results

It's not a part that can be removed, it's the ECM(computer) needs to be reprogrammed This feature is really there so you don't break the engine and tranny parts. This car is not meant to go that fast

It's not a part that can be removed, it's the ECM(computer) needs to be reprogrammed This feature is really there so you don't break the engine and tranny parts. This car is not meant to go that fast

Washing the motor is ok, NEVER steam clean! Bad alternator, just a coincident that it broke after your cleaning. The pop noise??? Most likely, a suspension part needs replacing

Have you done brakes before? If yes, it's all the same. Different makes, different set-up. If this is your first time ever, ask buddy that knows, watch him/her do one side, then you do the other and have him/her double check your work.

It opens fine until the end, hear the motor noise unless I release the button, when I close, it will move about 2 inches then stop.

did you change the brain,ECU? If not, that's your problem The factory ECU was intended for 1.5, everything changes when you put a different motor in.

did you change the brain,ECU? If not, that's your problem The factory ECU was intended for 1.5, everything changes when you put a different motor in.

You have a short, follow the wires that goes to the dash,more than likely either you have a loose connection touching ground or a broken wire. You might ask why not eveytime, when you drive, the car bounces, thus moves the wire, good luck

You have a short, follow the wires that goes to the dash,more than likely either you have a loose connection touching ground or a broken wire. You might ask why not eveytime, when you drive, the car bounces, thus moves the wire, good luck