Search results

I saw an auction for an exhaust pipe for a Honda Goshi. The pipe lookes identical to ones used on CB100n, Cb125s/j or Cg125. I would like to know if Honda Actuatly made such a model of bike, or if the seller made a mistake

Hi, Ive sorted my other problem, it turned out that there was some junk blcking the main jet on No3. Anyway i have took those carbs off and put the ones that are supposed to go with the bike.The only problem i have is that No1 (far left cylinder) leaks when i put the bike on the sidestand. On...

Hi why would you want to INCREASE the amount of fuel it burns? If my bike was running as normal but used less fuel- that would be brilliant!.

Recently my kawasaki GT550 has started running on three cylinders. The bike has always been a bit lumpy running and at tick over it would drop and raise about300-500 rpm.Also it burns oil at start up. but now i find that No3 cylinder runs colder than the others, but does warm up. The bike will...

Recently my kawasaki GT550 has started running on three cylinders. The bike has always been a bit lumpy running and at tick over it would drop and raise about300-500 rpm.Also it burns oil at start up. but now i find that No3 cylinder runs colder than the others, but does warm up. The bike will...

My mom has a Honda Civic 1.4. she has had it many years and lets me drive it. But she was told that the way the key fob works is normal.... what do you think? the key fob will ONLY lock or unlock the doors when you stand right by the drivers door and point the fob at the right angle through the...

Im looking to see how much it would cost to get hold of one to transplant the engine and other parts into a kawasaki GT550 frame

Im trying to replace the xr125 alternator as it wont run my cg125 cdi As it doesnt have a separate winding to power the cdi.So im after the correct cg125 alternator. My engine is an electric start model. An Xr125 has a 3 phaze alternator

use say a xj650 frame? Im looking for a Yamaha XJ750 seca frame ( not custom version), but unable to find one on Ebay. I have all the xj750 parts except a frame, so if i cant find a xj750 frame, is a xj650 frame identical ? Im in the west midlands UK

...and what should it look like? Im having my worn cylinder rebored, and ive been quoted £30 for a rebore and honing. I will be providing the piston and rings , which will be .50mm oversized. My bore is at standard currently. Ive had bad luck with rebores in the past, and so i would like to...

If it was sold in UK, they it will have a vin number. You will need to obtain a V5 logbook for it, which will mean it will need to be assigned a reg number. You will probably get an aged related plate or a Q plate. Then you need to put on: working horn Front headlight with pilot, main and high...

PLease dont suggest cmsnl or pdf download place as they donw have any diagrams for this bike.Also im not paying £14+ for a haynes manual just to look at the diagram and never use the book again!. I would like to know how the cdi unit is wired up, so if someone has a wiring diagram for this...

I tested the output on my cg125 live feed to its cdi and the voltage reading i got was 70-120volts ac!. So now im wandering if on my other project, wether i will need to replace the alternator on the xr125 engine for a cg125 one insted.

I wanted to know if the above engine would fit and work in a Honda cb100n, with only minor modification.

Right the following engines will fit my kawasaki gt550 with only changine the gearbox. I have looked at a few GPz and ZX600 engines on ebay and they look like they will fit, with only the gearbox need to be swapped. I have been told by a few answers on here that this engine will not fit, yet i...

carburettors? I bought some dial vacuum gauges, so that i can balance my own carburettors, but im not sure how to correctly balance them When i put the gauges on. On tickover the readings are very close. When i rev it some appear to advance a little quicker than others. Could someone explain...

I have a Honda XR125 2005 cdi engine that im putting in a Cb100n, but im having difficulty finding a cdi unit for it. I wander if a cg125/china/other japanese/ race cdi would work on it. Ive seen a few on Ebay

I recently bought a head light off ebay and the seller says it was originally off a CB185. The bubl socket has the following wires: White -? Yellow -? Black and white - Earth/ground I cant use the bulb as a guide as the wattage is 35/35watts. So is the White wire highbeam?

...possibly replacing the engine? Im looking for people who have street fightered either a Z550 , a z550ltd, gt550 or similar. As i would like to know any improovements i can add to my kawasaki gt550 . Here is a list of things i would like to replace: -Front braking system.I dont like the...

Im doing a project bike, and using a wiring loom off a cb125t. his bike would have used two CDi units and two coils, But i only need one- I have modified the wiring to suit my need, but my wiring diagram for this model only shows six wires connected to the cdi unit.Whereas the loom i have has...