Recent content by dwayne c

1.The intersection of a plane and a line could be which of the following: a ray a segment a point an angle 2.Given that A, B, C, and D are noncoplanar, which of the following could be the intersection of Plane ABC and ray AD? a line a point two points a point or a line...

Your answer is no. But, You can stroke it to 408 cubic inches with a 408 stroker kit. But you don't have a windsor you have a 5.4 modular engine which can also be stroked, but leaving the stock supercharger on a stroked mod engine would kill power. Good Luck and look up johnny lightning...

I would go for the soundstream 1500 that way if you upgrade subs, your amp will be big enough, I've always had problems with kicker amps overheating, so I quit buying them. Good Luck

I would have to tell you to change your mind on this, It takes a lot more than just bolting a turbo on your engine. Gotta have blow thru carb, turbo,blow off valve, wastegate(unless turbo has internal wastegate), turbo headers. full pressure regulator that is boost controlled. You have to...

You can get cheap econo pj's for around 300 bucks, and it goes up from there, My paint jobs typically run from 1100 being the cheapest and up. You can get into $10,000 and up paint jobs when you get into many different colors and having airbrushing done on top. Like what you see in minitruckin...

For a 302 go with 331 stroker kit from eagle with forged pistons For the 351 go with a 408 kit from eagle with forged pistons. The 351 block is stronger than the 302 and will not split in half like the 302 will when you get around 500rwhp.

If you want power and strength, then drop you in a stroked 351. I'm sure that the 289 will split in half when you get around 500rwhp, so your only going to be able to make so much power and have to stop to be safe, or risk splitting your block. But if you want to keep the 289 and make alot of...

Sounds like a short inside the amp, When you have a short inside the amp or anything that is connected to the amp, the amp will go into protect mode and the red light will come on and you have to disconnect the power to reset it if it comes on as soon as you hook the power back up, it means you...