K
K-Man
Guest
Hello!
Help me to flash it.
/If anybody have Erom Z800 Brown CID36 in .bin format, upload it, please!/
I flash Erom, GDFS by SETool2.
After that Full Flash (FS+Main).
Different errors are displayed, but from 2-3-nd time it runs and:
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35599***** CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
Flashing MAIN firmware:C:\Downloads\Z800\Unziped\Z800i_R1AB014_M AIN_EMEA_EU_CID36.bin
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:268
Will flash 268 blocks...
On that place it stops on different steps: 6/268, 12/268.
And after that:
Send subblock NAK
Elapsed:118 secs.
Battery is charged to 4.45 V.
Help me, plz.
Recovery in SETool not worked - see log:
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:355991***** CERT:BROWN
bad file, will not flash it.
Recovery failed. Phone dead.
Elapsed:14 secs.
I do Recovery in Sonics.
And today i trying flash it on ***:
Client Version 13.8
Shortly press Power button!
Detected SonyEricsson: Z1010/V800/Z800/K600/V600.
Phone Color RED
Status Ok, OTP Close, CID36, PAF1
IMEI: 355991-00-27******
Flash file CID:36, Phone CID:36
Flashing 268 blocks...
Block 2 - flashing error!
Execution Time - 00:00:14
Error: 0x005556
On that place it stops on different steps: 2, 8, 14 too.
Block 8 - flashing error!
Thanks!
Sorry for my english.
With best wishes,
Alexander.
Help me to flash it.
/If anybody have Erom Z800 Brown CID36 in .bin format, upload it, please!/
I flash Erom, GDFS by SETool2.
After that Full Flash (FS+Main).
Different errors are displayed, but from 2-3-nd time it runs and:
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:36
Speed:115200
OTP status:0 locked:1 CID:36 PAF:1 IMEI:35599***** CERT:BROWN
Loader:041214 0759 MATCXC1325712_PRODUCTION R2Z
Flash ID check:890D
Flash props sent ok
Switching to USB...
Phone stays at current interface.
Flashing MAIN firmware:C:\Downloads\Z800\Unziped\Z800i_R1AB014_M AIN_EMEA_EU_CID36.bin
CURRENT FLASH FILE CID:36
Matching CID according file...
SSW uses dynamic hash, dynamic hash len is:268
Will flash 268 blocks...
On that place it stops on different steps: 6/268, 12/268.
And after that:
Send subblock NAK
Elapsed:118 secs.
Battery is charged to 4.45 V.
Help me, plz.
Recovery in SETool not worked - see log:
RECOVERY MODE STARTED
Open COM port OK
Recovery:041213 1451 MATCXC1325413_CERTLOADER R3S
Fetching phone data from OTP
OTP status:0 locked:1 CID:36 PAF:1 IMEI:355991***** CERT:BROWN
bad file, will not flash it.
Recovery failed. Phone dead.
Elapsed:14 secs.
I do Recovery in Sonics.
And today i trying flash it on ***:
Client Version 13.8
Shortly press Power button!
Detected SonyEricsson: Z1010/V800/Z800/K600/V600.
Phone Color RED
Status Ok, OTP Close, CID36, PAF1
IMEI: 355991-00-27******
Flash file CID:36, Phone CID:36
Flashing 268 blocks...
Block 2 - flashing error!
Execution Time - 00:00:14
Error: 0x005556
On that place it stops on different steps: 2, 8, 14 too.
Block 8 - flashing error!
Thanks!
Sorry for my english.
With best wishes,
Alexander.