A aleromi99 Guest Nov 9, 2008 #2 Yes as long as the lower end of the engine is not damage you should be fine...
S sargent0923 Guest Nov 9, 2008 #3 As long as the heads were machined there should be not problem. Just look for white smoke out the tailpipe and any peculiar smells.
As long as the heads were machined there should be not problem. Just look for white smoke out the tailpipe and any peculiar smells.
J jegwynn Guest Nov 9, 2008 #5 if u did not drive it after u saw it then u wont have to machine the head as long as u did not run it hot, otherwise just replace the gasket and u should be ok
if u did not drive it after u saw it then u wont have to machine the head as long as u did not run it hot, otherwise just replace the gasket and u should be ok
R rockbase Guest Nov 10, 2008 #6 if that's all that was wrong and you didn't warp the heads, then yes !